7MGTE Modified OEM Intake Manifold FFIM
I have a modified 7MGTE intake manifold for sale. It has been cut and paste-ed into a front face intake. I did not do the cutting or welding. It does work with factory peddle cable as well as cruise control. (bad news) The person that did the welding didn't do the best job. When the manifold is on the car the throttle body is tilted just to one side. This puts the top of the throttle linkage into one of the hood supports. On my car I had a small slit cut into it and never had problems. Yes it can be cut off and re-welded but since I'm not sure what was used as filler I didn't want to open a bag of worms. I ran this manifold for about 5-8000 miles at 15-18 lbs of boost. No issues. Both the lower and upper runners have been hogged and smoothed out. Since the entire project has been parted and sold I never had them finished or CC'd but they are much bigger to start with. The throttle body it self has had a lot of un-needed stuff cut and or shaved off of it. Since it ran with Megasquirt and didn't need it.
http://i446.photobucket.com/albums/q...pramani024.jpg
http://i446.photobucket.com/albums/q...pramani035.jpg
http://i446.photobucket.com/albums/q...hedrive017.jpg
http://i446.photobucket.com/albums/q...ypiugpu002.jpg
http://i446.photobucket.com/albums/q...rtopery031.jpg
http://i446.photobucket.com/albums/q...rtopery032.jpg
http://i446.photobucket.com/albums/q...oldcompair.jpg
http://i446.photobucket.com/albums/q...argis/sup9.jpg
This will work with factory ECU as well. $250.00
I also have the Turbo LSD from 1988. $250.00
