Yeah, I figured. It just gave me an opportunity to say that.
Printable View
In to buy!
Sadly, we were not able to get a gourmet roach coach but we will be selling sodas and water and there are several fast food joints close by.
McDonald's, Whataburger, Taco Bell, Braums, Burger King, Sonic, Ricks Cafe, Zeno's Meatball Kitchen to name a few. It's still BYOB for responsible adults.
I'm there after i mow at the Church, with NA/NB goodies:
Stereo box for between the seat belt posts, short shifter, lightened fly wheel and new plate, gadges and whatever else i have hanging around from the NB.
Thanks
zig
I was just told my wife and I are now able to attend. Might just be the motivation I need to pull more crap from my car to sell.
I'll be bringing:
NA front bumper
NA rear finish panel
High flow Walbro fuel pump
LOTS of brake calipers and rotors
NA cloth seat in great shape
2 voodoo shift knobs
Assorted OEM intake components for a '94
RB exhaust
Turbo pressure tester
Stock NB wheels with partially used Azenis
And so much more...
SERIOUSLY, this stuff must go. Stacking deep and selling cheap!
Hello all,
I'm a new miata owner (99 NB) and I just joined this forum today. I'm looking forward to participating on this site and well do my best to drop by Saturday. I do have a rear trunk carpet that i dont need for a NB that I'll bring.
Planning to attend. Tire kicker. Might buy something.
I am going to do my best to stop by. Will have my whole Kenwood stereo set up for a NB for sale Cash talks....
I just updated the original post but the big thing to know is this.
This is a RAIN OR SHINE event. Please plan for it accordingly. If you have a portable canopy, you may want to bring it.
Short list of what I'm planning on bringing:
AC idler pulley bracket (with pulley of course)
turbo exhaust
complete Torsen swap
1.8 rear caliper brackets
driverside headlight lid, black
BNIB ProSport boost gauge
1.6 valve cover
16x7.5 SSR Competitions with 215/45/16 Kumho XS (just under 2k miles on tires)
BNIB Mazda fuel filter
BNIB complete set of control arm eccentrics
smoked turn signals (side and main)
Whatever else I think to grab
If we spoke about something already, I will have it there as well, whether it's on the list or not.
Bipes ACU
BEGi FPR
Racing Beat Style Bar
Momo Leather Shift Knob (new)
Kenwood Radio/CD Player
Rain isn't supposed to arrive until later in the day. Cloudy all morning. Perfect for photos so bring your camera!
Rob: How cheap is the LINK? If the current buyer backs out.
Anybody have the need for stock 1.6 parts? I have stock 1.6 stuff I may throw in the car to see if anybody needs any of it.
I am bringing my old FM exhaust with broke flange - very cheap
NA front mask - free since I got it free
Good sealed beam NA headlights - cheap
Other misc. STUFF
Im not entirely sure, to be honest. It's not a wear item, but it's old. It's not the newest technology, but it's solid and reliable. My boss said he'd give me $200 worth of kart parts (if I get one) for it, but he doesn't have a Miata. So anything significantly less and I'll just hang onto it until he decides what he wants to do. Cash talks though, so if you have a number in mind, feel free to speak up.
If needed, I have the 550s with clips from my car too. So really, let me know what you're thinking at this point.
Didn't get the engines, transmissions, subframes or arms loaded. Truck is already full to the top of the camper. But I did find a a few more things.
new GV lip (a real one)
a poly rear finish panel
a new pair of HD '94 axles I had Raxles make
NIB Haltec E8 with wiring pigtail
a new custom made Enthuza 1.8 exhaust with a Magnaflow muffler in it and an additional turn down to replace the muffler
an Enthuza 1.8 test pipe
a bunch of NA and NB tailights
NA and NB mirrors
leather steering wheels
a set of parts for straight-stalk turn signal switch including the wiper motor and covers for it
a few JDM dress up trinkets
a new manifold and airhorns to use Toyota IRTBs on a 1.6
a IPD air cleaner box for IRTBs
three sets of the PIAA 960 lights like the ones I used to upgrade my RA Active headlights
a NIB Curt hidden hitch for an NA and two NIB plug and play wiring kits for trailer lights
some Porsche RS America door handle and door pull parts to duplicate the door pulls that are in my black car
a NIB '99 ATI crank damper with trigger wheel and sensor
a NIB Tilton 5.5" twin disc rally clutch and aluminum flywheel and all the fasteners to bolt it all up
new BHP brake pads appropriate for autocross (high torque when cool)
lots of new interior trim parts and clips
new delrin bushing suspension kit
delrin diff bushings
all metal OEM radiator with dual fans
And and update to the previous list:
OEM BBS 14" with caps and wrench
BBS RS 3-piece with caps in 15x6.5
New 15x10 Weld suitable for autocross or pimping!
15x9 Real Racing near new
STO 15x6 in great shape
NB steering rack
NA steering rack
driveshafts
a special diff (RX7 housing, T1 Torsen and Kia 4.7 gears with '94 stub axles - came from Randy Stocker),
OEM fog lights
I'm looking for a quality, resonated 1.6 exhaust so I can ditch the 3" Enthuza turbo on my car right now. Otherwise I'll keep the Enthuza with the Magnaflow and have a resonater hacked into it and reclock the flange for the 1.6.
I'm pulling my LINK to check it out and see if I notice anything visually and check solder places. I've been getting some funny signals with my car for the past few months and I'm finally deciding to blame the LINK. Was thinking it'd be cool to have an extra.
I'm probably going to bring the 10ae NB, some NC sway bars, an ACT 4-puck clutch w/ HD pressure plate for NC6mt, a drive shaft for NC 6MT, some misc NA parts, a good NB coil pack, and maybe some autocross tires.
edit - Holy crap, lots more than I realized!
GWR Race Single exhaust, like new
Homemade glass pack single NC exhaust
Tire warming blankets - silver foil bubble stuff
Custom lexan wind diverter for NC, straps between headrests
Black NC rear bumper appearance package lip, cut for Curt hitch
TDR prototype CAI w filter
k&N drop in filter for NC
Hotchkiss NC RSB, huge!
RX8 yellow rear sway bar
RX8 rear hub/knuckle w/ rotor and abs sensor
Custom cold air box to replace NC air box w short ram intake
AEM dry flow cone filter, virtually unused in box
Assorted oil filters
Odyssey pc680 battery, < 1 year old
ACT 4 puck clutch w HD pressure plate
OEM NC clutch and pp in great condition, 20k miles
Corbeau FX Pro alcantara seat w custom NC brackets and MER side mounts
OEM 06 NC taillights, perfect condition
HF transmission adapter for floor jacks, used minimally
Used HP+ pad set for NC, f and r
I might be able to help you out. I've got a Cobalt SS exhaust on mine right now (this one: http://www.mossmiata.com/Shop/ViewPr...eIndexID=73761). Since going turbo, I've been wanting to upsize it (too quiet and too small for turbo use). The only issue is that the exhaust shop that put it on hacked off the front flange and welded it in before I could stop them!! Oh well.
I'll look for you at the swap meet. I'll have the car with me so you can check it out. If it's something you're interested in, I'm sure we can work the logistics for resolving the flange issue.
Also bringing a '04 Mazdaspeed exhaust and some turbo pressure tester thingie. And a grab bag of assorted used brake pads...
I'm bringing some cash and an open mind.
Maybe Stumpy is eyeing himself a G-string :facepalm:
Updated my list substantially! Scroll up.:D
Something just came up and I can't make it...
Dang! I was really looking forward to this. Was going to show up with a fat gangster's roll. Oh well probably didn't need to spend the cash anyway. Maybe i'll scrounge some leftovers anyone has next week, lol.
Anyone have a set of >50% star specs that are heat cycled out or otherwise not competitive (read:cheap) let me know. My Yoko Neovas are officially too dangerous to drive if there's ANY water on the road. I won't be autocrossing for a long time but still want some fun tires.
I'll be looking for either a new top or some shocks.
I have a soft top frame and some beat up rear Koni sports. I'm guessing you meant hard top?
Well..we left to grab a bite and my buddy started feeling nauseous from the ride I guess. Good to meet some new people, check out some cool cars and hang for a bit. Can't wait for the next one. OZMDD, I left wanting that muffler. PM me if you still have it after today and I'll make a trip up to get it from you. =)
http://img.photobucket.com/albums/v7...ps5f362749.jpg
http://img.photobucket.com/albums/v7...ps4e41b9d3.jpg
http://img.photobucket.com/albums/v7...ps5ae1c9e3.jpg
http://img.photobucket.com/albums/v7...ps992a0b9a.jpg
http://img.photobucket.com/albums/v7...psc4c274bd.jpg
http://img.photobucket.com/albums/v7...pse7ab8f1a.jpg
http://img.photobucket.com/albums/v7...ps888083fe.jpg
http://img.photobucket.com/albums/v7...ps27773085.jpg
http://img.photobucket.com/albums/v7...psc1ebdea4.jpg
http://img.photobucket.com/albums/v7...psd6cd6e39.jpg
Was great putting faces to names!
http://img.photobucket.com/albums/v7...ps0cfd5215.jpg
I thought I saw you take a pic as I pulled up - I love it!
Was good seeing some of you again, and meeting some new peeps.
We should do a big Miata cruise around dfw sometime soon!
I saw you when i was driving home on forest lane...awesome looking nb btw
Cool pics MarbleGT!!
Thanks to Gary and TDR crew for a cool swap meet with cool people and cool cars!!
Great time and had fun time catching up with old friends and meeting some new people. modernbeat had an impressive spread of parts that I just couldn't resist. Thanks for the parts and thanks to black roadster for the key.