Results 1 to 15 of 15

Thread: FS: Fat Cat 46mm bumpstops w/boots

  1. #1

    Default FS: Fat Cat 46mm bumpstops w/boots

    Brand-spankin' new, still wrapped in plastic. I got these ordered and paid for before I went for the Teins, but there was a delay in shipping. They're sized M10 to fit KYB shocks, but may fit others (Bilsteins maybe? Not Konis, they're M12 IIRC).

    They cost me $87 shipped to my door, so I'd like to get that out of them, but I don't need them so they're better off with someone who does. If you're interested in these, just post or PM me.
    '94 Black & Black & Tan
    '99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...

    Dyno Days
    8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
    8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
    8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno

    Roger Moore: the Danny White of James Bonds

  2. #2

    Talking

    You should buy this camera and take a picture!




  3. #3

    Default Pix!

    Here ya go... I opened 'em up just so I could take these.

    And might I add, that's a really nice camera... somebody should buy it since I've already got one exactly like it.
    Attached Images Attached Images
    Last edited by trickyrix; 04-29-2008 at 09:23 AM.
    '94 Black & Black & Tan
    '99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...

    Dyno Days
    8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
    8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
    8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno

    Roger Moore: the Danny White of James Bonds

  4. #4

    Default

    I have the same bumpstops on my Miata, they are great improvement over the stock NA stops. I believe they are better match with lower than stock cars, i.e on lowering springs or paired with NB shock mounts
    94 Miata R package RPF1 195 RS-R RB FSB FCM Bilstein Ebay Coilover 550/350
    91 Civic Si Daily Beater


    "Its more fun to drive a slow car fast, than it is to drive a fast car slowly".

  5. #5

    Default

    Best serious offer... I'll bring 'em to the Wed Nite GTG.
    '94 Black & Black & Tan
    '99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...

    Dyno Days
    8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
    8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
    8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno

    Roger Moore: the Danny White of James Bonds

  6. #6

    Default

    Quote Originally Posted by trickyrix View Post
    Best serious offer... I'll bring 'em to the Wed Nite GTG.
    I'll give you a dozen brand new craftsman deep sockets, misc sizes for them.

  7. #7

    Default

    Quote Originally Posted by Titus View Post
    I'll give you a dozen brand new craftsman deep sockets, misc sizes for them.
    I'd do it but I've already got a TON of Craftsman sockets. What else ya got?
    '94 Black & Black & Tan
    '99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...

    Dyno Days
    8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
    8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
    8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno

    Roger Moore: the Danny White of James Bonds

  8. #8

    Default

    Quote Originally Posted by trickyrix View Post
    I'd do it but I've already got a TON of Craftsman sockets. What else ya got?
    Beyond the drawer full of duplicate sockets, I'm not sure. I will think about it.

  9. #9

    Default

    Quote Originally Posted by Titus View Post
    Beyond the drawer full of duplicate sockets, I'm not sure. I will think about it.
    Just let me know... I'll throw them in my trunk and be there Wednesday - motivated to sell/trade/get rid of 'em.
    '94 Black & Black & Tan
    '99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...

    Dyno Days
    8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
    8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
    8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno

    Roger Moore: the Danny White of James Bonds

  10. #10

    Default

    Need any spare stock parts?
    ...and across the line.

    1996 Mazda Miata - R-Package (Eve-L)
    2012 Mazda CX-9 - Grand Touring (Dory)




  11. #11

    Default

    Whatcha got?
    '94 Black & Black & Tan
    '99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...

    Dyno Days
    8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
    8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
    8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno

    Roger Moore: the Danny White of James Bonds

  12. #12

    Default New Lower Price!!!

    Would love to get these out of my trunk...

    $60 - Full/partial trades considered

    Things I'm looking for:
    Headlight retainer rings (I've got one that's gimped up and letting the light flop)
    A set of genuine Hella e-codes
    Good trunk carpet (mine's trashed from all the times my trunk filled with water)
    Dynomat or Damplifier for my doors
    OEM ashtray (I've only got the cup holder)
    '94 Black & Black & Tan
    '99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...

    Dyno Days
    8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
    8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
    8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno

    Roger Moore: the Danny White of James Bonds

  13. #13

    Default

    Ive got the headlight surounds and an ashtray.


    I will also throw in a handfull of new Craftsman sockets to close the deal.

  14. #14

    Default

    Quote Originally Posted by Titus View Post
    Ive got the headlight surounds and an ashtray.


    I will also throw in a handfull of new Craftsman sockets to close the deal.
    Awesome... I'll just go ahead and take that - I'm sure I'll find a use for the sockets . You want to meet up sometime before the next Wed Nite GTG? I'm in no huge rush, but that floppy headlight is driving me nuts. Whatever works for you...
    '94 Black & Black & Tan
    '99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...

    Dyno Days
    8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
    8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
    8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno

    Roger Moore: the Danny White of James Bonds

  15. #15

    Default

    Quote Originally Posted by trickyrix View Post
    Awesome... I'll just go ahead and take that - I'm sure I'll find a use for the sockets . You want to meet up sometime before the next Wed Nite GTG? I'm in no huge rush, but that floppy headlight is driving me nuts. Whatever works for you...
    Cool... Let me dig out the parts and get back to you.

Similar Threads

  1. FS: FCM 46mm bumpstops w/boots
    By trickyrix in forum dfwMiata.com Classifieds
    Replies: 0
    Last Post: 04-11-2008, 09:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •