Damn, thats nice!
I need to build one of those too.
What kind of plasma do you have?
Finally got a couple of good pics of my welding table.
It holds the welder/gas bottle/plasma cutter/extension cords and tools. The bright metal box under the table top on the right is the catch basin for the plasma grid on the top.
On the end of the table there is a vent to help keep smoke out of your face and a gate at the bottom that allows you to clean the slag out of the basin.
Damn, thats nice!
I need to build one of those too.
What kind of plasma do you have?
Hypertherm PowerMax30 110/220. It is wired for the 220 in my garage.
Linkie
I wonder if I qualify to be a TCB honorary member? I got most of the steel I used for a case of beer.
Congrats on getting it finished! At that price I would say it is very TCB
2005 Lava Orange MSM #601/1428
211 rwhp, 195 ft. lbs on 1/6/07
Yeah... very nice. Where did you get your steel? I'm about to build a wheeled cart for my MIG welder and don't really know where a good place to get metal.
--
Dave"Opinions are like ..."
I have a wheeled cart, but want a wheeled table.
The 3x3x.25 angle and 3x3x.120 square tube I got from a friend for a case of beer. Still have some left but am slowly using it up on other little projects.
The sheet of 22 guage steel, that I made the catch basin from, and the 1/8 plate I made the bottom shelf from I bought from Metal Supermart in Dallas. Have a lot of the 22 guage left. Probalby about 2/3 of a 4x8 sheet.
The 1/2 inch thick table top was from a company that custom cuts plate steel. Its really the only piece that does not qualify as TCB.
the 4 heavy duty ball bearing casters I bought at 3rd Monday in McKinney for $12. They are about $30 each new.
Last edited by HudsonHawk; 02-01-2009 at 07:11 PM.
Very nice work there.
05 MX-5 Mazdaspeed #1024 Titanium Gray Mica
Sweet!
Careful, don't get any spatter on there. Very nice BTW.