Should be an o-ring, it was an o-ring on jrj512's '92 if we are talking about the same fitting.
Well the A/C crapped out and I think I've found the leak. The question I have is if the compressor is going to have to be replaced or is it the hose and/or fitting going to the compressor. The fitting in question is the one for the hose that connects to the back part of the compressor if your looking at it from the front of the car. The little metal block looking thing that has the hose going into it and the bolt holding it to the compressor. It seems to be leaking from where it mates up to the compressor. Is that an o-ring or a compressor replacement?
I'm not speeding officer, I'm qualifying!!!
92 Red (sold)
2006 ZX6R 636 (sold)
99 S10 ZQ8 (sold)
95 Merlot M
05 GSXR 600 (To buy my house)
Should be an o-ring, it was an o-ring on jrj512's '92 if we are talking about the same fitting.
Good description of that. It is an o-ring. That's where mine was leaking years ago. I tried to get one at all the parts stores and ended going through Mazda. With what I know now, I'd try Ace hardware store first.
Smile
93' LE #1136 - FM II
250k miles
Be brave take take the bolt out and see if there is an o ring between the block and compressor.
Sharpie I found one to fit. Now does anyone have a spare front a/c line that they are not using. I've got a hole in mine.
I'm not speeding officer, I'm qualifying!!!
92 Red (sold)
2006 ZX6R 636 (sold)
99 S10 ZQ8 (sold)
95 Merlot M
05 GSXR 600 (To buy my house)
Check with Todd/Titus.
Daily Driver: 2013 Club edition in Pearl White Mica
Lightness? What's that? I drive a PRHT!