Reply With QuoteWill the suspension pieces fit a NA? Specifically the springs and shocks. IIRC all of the stuff on my 92 NA is stock pushing 170k miles.
NB RB tubular sway, Torsen, Fuji short-throw, AGX/Hard S, pads, Nardi, etc.
FIAMM aftermarket horn, used, $SOLD$
Fuji Racing Type-B short-throw shifter for 5-speed w/ adjustable length lever and a nicely weighted knob, used, $SOLD$
'95 4.10:1 Torsen in carrier, $SOLD$.
NB AGX w/ Hard S springs, used, $SOLD$.
NB driver airbag, in car for 84k miles, $75.
Non-Sport "value line" OE 1.8 front pads, new (from Rosenthal), $27.
Non-Sport OE 1.8 rear pads, used w/ clips, lots of friction material left, $SOLD$.
Daikei plug 'n' play hub for NB w/ ring for Nardi/Personal wheels & airbag resistor, used for 12k miles, $SOLD$.
NB Nardi wood knob, new, would go great with parchment interior or trickyrix's Momo wheel, $SOLD$.
Racing Beat tubular front sway bar for NB, used, $SOLD$.
Last edited by juxt3r; 10-01-2009 at 05:37 PM. Reason: removing photos
'90 "LE" available for purchase soon
2008.5 CWP MS3: JBR 70d trilogy engine mounts, short throw shifter & shift plate bushings; AST 4100 w/ 400lb springs f/r; JRZ camber plates
Will the suspension pieces fit a NA? Specifically the springs and shocks. IIRC all of the stuff on my 92 NA is stock pushing 170k miles.
2004 Saturn Ion Redline
Wrong Wheel Drive
1992 Grey MX-5
Right Wheel Drive
http://profile.imageshack.us/user/jeepinbanditride
I'll take the FIAMM.
Dibbs the dakei hub...gotta check with the wife first though.
'94 C-Package Black & Tan | MS3x | exhintake | USDM Tein Monoflex 10/8k | My 8 year roadster evolution
For $35 I'll take that shift knob... I do believe it would look good with the wood I've got on the wheel. :)
'94 Black & Black & Tan
'99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...
Dyno Days
8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno
Roger Moore: the Danny White of James Bonds
Just realized the Daikei hub is for an NB. Does anyone know if this will fit an NA?
'94 C-Package Black & Tan | MS3x | exhintake | USDM Tein Monoflex 10/8k | My 8 year roadster evolution
PM sent
92 Sunny 214k, 95 Dimples, 93 James Bondo, 92 SM (Speedie Jr)
Shelley, Apex, Tigger, Max, Baby(cats), Fluffy, Spot, and Peanut (mini horses), Cinnamon & Bitsy(dawgs)
MSR #1001, SCCA #208822Let's go racin'
Still got the sway bar? Will it work on an NA?
'94 Black & Black & Tan
'99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...
Dyno Days
8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno
Roger Moore: the Danny White of James Bonds
No, it won't.Originally Posted by trickyrix
I'll take the rear pads for $10. Where do you live?
TXMC: Drinkin, shootin, racin!
PM for the wheel hub.
Gabriel
So very tempted by that sway bar...
Missing my Miata...
1990 CRX HF (78,000 Miles) FS/FT
Has he replied to anyone????????
92 Sunny 214k, 95 Dimples, 93 James Bondo, 92 SM (Speedie Jr
Shelley
MSR #1001, SCCA #208822
Merv, Don't think he has been lurking - Last Activity: 09-20-2009 06:05 PM
May want to try his Email Address juxt3r @ tx.rr.com (remove spaces)
He travels a lot for work, too. Definitely not a lurker.
'94 Black & Black & Tan
'99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...
Dyno Days
8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno
Roger Moore: the Danny White of James Bonds
Yes it will with adjustable end links. I don't see the mounts though.
Stripe Das Sape
We are leading the world to democracy by example.
Thanks. I'll wait
92 Sunny 214k, 95 Dimples, 93 James Bondo, 92 SM (Speedie Jr
Shelley
MSR #1001, SCCA #208822
PM again on the sway.
Gabriel
Sorry, all. Stupid busy week at work. I'm at 40 hours already with three days left.
Making a list by time stamp on posts and PMs to see who has first dibs on stuff. Will return messages to all interested parties this evening.
'90 "LE" available for purchase soon
2008.5 CWP MS3: JBR 70d trilogy engine mounts, short throw shifter & shift plate bushings; AST 4100 w/ 400lb springs f/r; JRZ camber plates
I believe the splines will fit. However, the airbag resistor will not work for the NA.
'90 "LE" available for purchase soon
2008.5 CWP MS3: JBR 70d trilogy engine mounts, short throw shifter & shift plate bushings; AST 4100 w/ 400lb springs f/r; JRZ camber plates
Ya it will :) The NB bars will fit with aftermarket end links. I saw a guy in STS at nationals with a NA with the NB RB bar
David Hedderick
Houston, TX
92 Miata SE; 02 RSX-S; 01 Boxsturd; 05 STI
Posting Permissions
