wtb 1.8 cat

[1.8-M]

I need to replace my 1.8 cat due to all 4 studs are striped out..or dose anyone know a place that would punch out my striped studs..

[Mark52]

Just knock them out carefully with a BF hammer, then use regular bolts/nuts.

[1.8-M]

yeeeeaa!! i try that and it didnt wrk..i even used a air hammer still didnt wrk..so then i try a cut off wheel and cutted off the stud and head and took all freakn day to drill out the stud..lol

[MiataPetey]

I need to replace my 1.8 cat due to all 4 studs are striped out..or dose anyone know a place that would punch out my striped studs..

I have one if you'd like to buy it. It's from my '94 with 84k miles. Just passed emissions with flying colors 3 weeks ago. PM me if you're interested.

[Rogue]

Just knock them out carefully with a BF hammer, then use regular bolts/nuts.

Good luck with that BFH, since they screw in.

Deep Creep and Vice Grips usually get them, unless its on a 95M.

[driftdevil]

Good luck with that BFH, since they screw in.

Deep Creep and Vice Grips usually get them, unless its on a 95M.