Are you saying you already have the hardware to mount these straight to the floor? (I am looking for seats that put me under my HDHCHT)
Do they hold a skinny guy well?
TIA
I got these for the Miata, but my wife didn't like that the back wasn't adjustable (so she could see over the dash ).
Both driver and passenger seat with pump lumbar support. Black, non-probax. They have added cushion in them from the previous owner (some sort of fancy foam that all the Lotus guys are doing).
They are comfy, super light and have taller head rests (which I found to be nicer than my NB seats). If you want to mount them to the floor you'll gain a TON of headroom (and I found the seating position to be quite nice. If you mount them to the rails you pick up at least 1-2" of leg room.
Selling for what I paid, $380.
I also have the sector 111 seat grommets for adding harness holes (http://www.sector111.com/images/prod...s/seatgrom.jpg) that I'll sell for $50 ($72). They're still in the box.
I'll include the bolted together setup I made to play with, but I recommend that you at the very least weld it rather than bolt it together.
Only thing I'm really interested in is a rollbar.
Pic of the seats (they are the two in the back, the pic is from the guy I bought them from, he had two pairs):
Are you saying you already have the hardware to mount these straight to the floor? (I am looking for seats that put me under my HDHCHT)
Do they hold a skinny guy well?
TIA
94 Miata R package RPF1 195 RS-R RB FSB FCM Bilstein Ebay Coilover 550/350
91 Civic Si Daily Beater
"Its more fun to drive a slow car fast, than it is to drive a fast car slowly".
I have enough to get you close on the driver's side but you'll need some angle iron (the piece I cut was for mounting to the rails so it's too short). I didn't do anything for the passenger side.
Joseph's pretty skinny Otherwise I'm not sure. I've not been skinny since... well never.
Sean, these are some nice seats. I would have bought these in a heart beat if I had sold my Memoryfab seat.
I do have a Hard Dog Dual Diagonal roll bar on my MSM(Which I am selling) but doubt I am going to remove the roll bar since it is a hassle, plus I had already but up the panels and carpet to fit the roll bar.
i'd like to check these out. send me a message please if you don't notice the message i just sent you
i will also be fine with paying the 380.
i could check these out today even and possibly buy them if we set something up pronto
Last edited by wolzen; 08-03-2010 at 05:57 PM.
Nope, bought her new in MN.
i have a 41 inch a** circumference. would they hold me in well?
found more pics of your seat
yah i've done something unheard of, traveled back in time and snapped some photos
lol I had that same picture, but didn't post it :)
Up until a few months ago I was a 36" going on 38" waist and I was fine. Everyone is built different. Most of the people using them are bigger guys though. They were far more comfortable than my current foamectomy stock 00 seats.
hope they're more comfortable than my 99 seats with a foamectomy
Sold to wolzen pending pickup this weekend :)
is the interior of your car tan?
wow my title on dfwmiata.net actually reflects the stage i'm at
Last edited by wolzen; 08-04-2010 at 02:35 AM.
nice wolzen!
Cory
2006 Mazda MX-5 GT (SOLD)
1999 Mazda Miata (FOR SALE)
2004 Chevrolet Z06/Z16
2013 Kawasaki Ninja 650
I think these would work great for someone that is a 36ish waist, I'm a 31 and I move around the seats a bit without a CG lock.
VW Bug in running shoes
M Porcupine sedan
M Porcupine coupe
Crusty old e46 beater
Battery Powered appliance car
Sold :) Lock'er up.