Reply With QuoteI went with RockAuto for my coolie ABS equiped front hubs they we under $100.00 each for Japanese made Timken Bearings!
No Chinese junk bearings for me thanks!
Front Hubs for NA?
Any advise on front hubs for an NA? I have detected a whine at about 70 mph and believe it could be front bearings as they have never been replaced. I have priced several on the net and the local auto parts store will supply them as well. I am interested in quality as this car only gets track/AX/TT beatings. Is there a brand that is lighter than stock? Is a low milage used part an viable option?
Bobby
RED RULES!
90 Miata, 04 Rubicon, 05 Boxster
I went with RockAuto for my coolie ABS equiped front hubs they we under $100.00 each for Japanese made Timken Bearings!
No Chinese junk bearings for me thanks!
I went with OEM from Mazdaspeed Motorsports. A little more expensive, about $120 each, but peace of mind for me.
On the track, I am fearless.
If you were as slow as me, you wouldn't be afraid either.
1994 M Edition
CSP 67
I'm lusting for these: https://appliedracingtechnology.ipow...p?productid=20
Very interesting. I may just give them a call.Originally Posted by SixAce
Bobby
RED RULES!
90 Miata, 04 Rubicon, 05 Boxster
too bad they went out of business...
David Hedderick
Houston, TX
92 Miata SE; 02 RSX-S; 01 Boxsturd; 05 STI
Similar ones at Planet Miata.
On their home page...
http://www.planet-miata.com/index.php?section=home
Figures
Thanks!
I have one sitting in a box because it lasted 1-day and ART will not refund my money, you can have it if you want. The other started making noise at Hallett last month and I'm about to open it up and have a look inside.
I've had the best results from repacking Chinese cheap-o bearings with white Amsoil $$$ grease twice per year and taking special care to keep everything clean.
Last edited by SirHustlerEsq; 10-05-2010 at 01:11 PM.
TXMC: Drinkin, shootin, racin!
They are still around. Karl was fine to deal with but when I sent him pics he decided the problem was with the heat treating, not "his work", even though I paid him to heat treat them.
TXMC: Drinkin, shootin, racin!
Karl was partners with his ace mechanic Ed. i think they split in 2008 or so (?) karl appears to be running the biz out of his home now and working on his 944. they did my injectors earlier this year, so Karl is still at it. sorry to hear he wont take care of those hubs.
95 r white
If you are not looking for whiz bang then look no further than rock auto. Autozone can beat their price by a little bit but you get duralast hub instead of one with timen bearings. The same Timken bearing equiped hub at autozone is about 50 dollars or more more expensive at the big box places.
2004 Saturn Ion Redline
Wrong Wheel Drive
1992 Grey MX-5
Right Wheel Drive
http://profile.imageshack.us/user/jeepinbanditride
Thanks all for the help. I ordered a front set from Planet so we will see. Should be at my house by early next week.
Bobby
RED RULES!
90 Miata, 04 Rubicon, 05 Boxster
FYI, the Chinese bearings I just picked-up of Ebay have good grease, easy to repack races, and (most important) heat treated inner and outer races.
TXMC: Drinkin, shootin, racin!
Posting Permissions
