Do you have any pics of the hood?
I started cleaning out the garage today. This thread will be updated as I make more progress.
7/8" Master cylinders, 2 of them: $25 each
7/8 master cylinder and non-sport booster $575 (~20-miles on the master cylinder)
GT2860rs .86AR turbine housing (only): $50
Wastegate actuator: $25
BEGi radiator "scooper": $100
"Outlaw" sized Wilwood B compound pads .680": $50
1.6 MAF: $25
Stock rear swaybar: $25
Human head: free with purchase
auto drive shaft: 1 12oz shiner
valvoline synthetc atf x 2: free
4-lug rear vw rotors: 1 shiner
1.6 rear calipers: 1 Shiner
Things in green are now free.
and that's about it for now. All prices are obo... But a beer helps lower the price.
Last edited by SirHustlerEsq; 10-25-2010 at 05:54 AM.
TXMC: Drinkin, shootin, racin!
That one is at my parent's house and I'll have to zip over there to get them. Are you really interested?
TXMC: Drinkin, shootin, racin!
Don't worry about going to take pics. I did some digging and found these:
http://www.dfwmiata.com/showthread.p...l=1#post156643
Is it still unfinished white, or did you paint it?
Edit: Email sent (PM box is full)
Last edited by Deviate; 10-15-2010 at 10:31 PM.
Unfinished white.
TXMC: Drinkin, shootin, racin!
Email sent for real this time. Looks like I accidently copied an extra period on your email. Oops.
Should not be a problem, Trey often has extra periods.
Hood is gone, added a couple things, more to come tomorrow. Not manstrating today, maybe tomorrow...hopefully soon or John will owe child support.
TXMC: Drinkin, shootin, racin!
Auto Driveshaft: I'm assuming it's not compatible with a 5spd? What is different, where it connects to the transmission, diffferent splines?
'94 C-Package Black & Tan | MS3x | exhintake | USDM Tein Monoflex 10/8k | My 8 year roadster evolution
The auto driveshaft has a larger diameter where it goes in to the transmission - ask me how I know.
Mike Walsted - Not an expert, just a data point.
1999 Miata
2003 MIata
1999 Miata
2001 Kia Rio
Is it safe to assume the wastegate actuator is the one from a "normal" GT28RS? 12-14psi unit, or the 6? Pics just to be sure? I might be interested.
Thanks
12psi unit but I was able to make as little as 8psi on it. I can get the serial number for it tonight.
TXMC: Drinkin, shootin, racin!
Please do. I have a little side project, and the 12psi unit would be perfect.
I forgot, I'll try to do it tonight if I can remember after the gym.
TXMC: Drinkin, shootin, racin!
Ha. No rush, I wouldn't pick it up till this weekend any way. If you could even grab a crappy camera phone pic, that'd be better. The bracket provisions is what I'm really concerned with, especially if it's the 12psi can. I'm 90% sure that the standard GT28RS piece will work.
I accidentally packed the WG actuator, I'll get a look at it next weekend.
TXMC: Drinkin, shootin, racin!