WTB: Battery Tie-Down

[p4R4d0x]

Not sure what Mazda ships with these cars to hold the battery in place, but mine didn't come with one. I rigged something up with what I could find at autozone, so I could pass tech, but I frankly don't trust it:

2011-10-24_18-29-39_803 by alstauffer, on Flickr

So I'm wondering if anyone has a spare proper battery hold-down device that will work on my '92?

Thanks!

[POS Racing]

Here is the OEM Setup.

[Rogue]

http://parts.arlingtonmazda.com/prod...2d032B%29.html

[cone-cerned]

Add this. http://parts.arlingtonmazda.com/sear...-292A&x=20&y=9

[Keifersmith]

I've got the following pieces that might help:

56-030 - the upper clam bracket (or whatever they call it)
56-863A - plastic tray (one of the long sides has a split in it. not too bad though)
56-033 - Mine looks exactly like the bracket in your picture, not the one in the diagram.

I don't have the long bolt (70-985A). can't tell from your picture but you can probably just use one of the bolts from your AZ kit or maybe someone will have one of those laying around.

You're welcome to them if you want'em. I'm in North Richland Hills so probably not real convenient for you but I'm sure we could work something out.

Keith

Here is the OEM Setup.

[RedHot-n-Red]

I have a slightly used 56-030 - the upper clam bracket if you want/need...

Jeff