WTB 1.6 Miata Coolant Sealing cap

[Titus]

I am desperately in need of a new coolant sealing cap. This is the rubber cap that goes on the back of the head on 1.6 Miatas to cap off an unused coolant nipple. If you have a spare on the shelf, I will buy it from you TODAY, and have a new one shipped to your door later in the week. The 93LE sprung a leak here and our Tahoe lost it's transmission less than 24 hrs later, so I really need this fixed today!

http://parts.arlingtonmazda.com/prod...%252d104).html

[motorollow]

I am guessing you have thought about putting a screw in the hole instead of putting on a cap.

[Jiggerachi]

Is the part the same on 1.8s? If so and you get desperate, my 94 is out of commission for the next couple weeks at least, let me know if I could be of any help. I don't even know if an old cap would come off in one piece(never actually seen this part myself), but yea if you get desperate.

[POS Racing]

Assortment contains 2 each of the following I.D. sizes: 3/8", 1/2", 5/8", 3/4"

[Vashthestanbeto]

Hi, I just had to repair mine not more than a month ago and all that I used was a section of autozone fuel hose of similar width and a bolt to block the other end, plus 2 hose clamps. It worked perfectly. Best luck to your LE's speedy recovery.

[Titus]

Hi, I just had to repair mine not more than a month ago and all that I used was a section of autozone fuel hose of similar width and a bolt to block the other end, plus 2 hose clamps. It worked perfectly. Best luck to your LE's speedy recovery.

That is exactly what I did... I just finished a 30 minute test drive and no leaking. It should hold until the OEM part arrives in the mail.