I'd think Mazdacomp is the best bet, or LKQonline.com
Son tryed the cleaner kit on the plastic headlight covers. They are too pitted to clean.
Where can he buy replacement covers for a 2006 Mazda 3 ???
Thanks
Jim H.
I'd think Mazdacomp is the best bet, or LKQonline.com
Polished Turd Racing
Mick wrote: "I think Jerrett is the best autocrosser I have ever seen naked."
I've gotten parts for my 3 at Rosenthals/Arlington Mazda.
'99 Emerald Green - 2015 NASA Texas TTE Season Champion (showing up is really 100% of it)
There are a few different quality levels of headlight restoration kits. Which one did you use? Was there any actual sanding?
Polished Turd Racing
Mick wrote: "I think Jerrett is the best autocrosser I have ever seen naked."
^Can this one be picked up at vatozone? The headlights on our murano look to have been very poorly restored by the PO, they have a very thick and uneven epoxyish clearcoat so I need a good kit if I have any hope of getting all that crap off of them.
'94 C-Package Black & Tan | MS3x | exhintake | USDM Tein Monoflex 10/8k | My 8 year roadster evolution
Yep, and OReilleys and HF, and Wally World...
Polished Turd Racing
Mick wrote: "I think Jerrett is the best autocrosser I have ever seen naked."
If you get the 3M foam polishing pad, you can also do touch-ups with Meguiar's plastic window cleaner and polish. I had some on the shelf from my NA days and found it works great on headlights too.
The last time I polished badly pitted headlights, I just started with white rubbing compound (the pasty stuff in the little plastic tub) and an electric buffer. Then I went to a finer polishing compound to clean it up. I have some of that Meguiar's headlight polish stuff, but I've only used it to clean up a pair of sunglasses - it's too fine to do any real work.
'94 Black & Black & Tan
'99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...
Dyno Days
8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno
Roger Moore: the Danny White of James Bonds
The plastic covers are not available by themselves, you have to buy the whole headlight assembly. Best price I could find was $376 each. NO way.
Bought the 3M kit instead of the Turtle Wax kit. And sanding was involved. Son sanded and followed the 3M instructions. Worked like a kit should work and he can now see where he's going at night.
Thanks for the help guys !!!
Jim H.