Results 1 to 12 of 12

Thread: Front Wheel Bearings Source??

  1. #1

    Default Front Wheel Bearings Source??

    Passenger side front wheel bearing on the '02 has play in it so it is time for it to go.

    OEM? Aftermarket? Run it till it seizes?

  2. #2

    Default

    I've been getting Timkin from Rock Auto.

  3. #3
    Orange cones fear me. cone-cerned's Avatar
    Join Date
    Dec 2005
    Location
    Woodbine, Texas
    Posts
    4,684

    Default

    I replaced mine with OEM from Mazdaspeed.
    On the track, I am fearless.
    If you were as slow as me, you wouldn't be afraid either.

    1994 M Edition
    CSP 67

  4. #4
    Team Cheap Bastard
    President & Founder
    sammm's Avatar
    Join Date
    Jan 2004
    Location
    NC
    Posts
    6,457

    Default

    Rock Auto is where I'd check first.

  5. #5

    Default

    Quote Originally Posted by cone-cerned View Post
    I replaced mine with OEM from Mazdaspeed.
    Dang OEM has gone up a touch.

    NA23-33-04XA HUB,WHEEL $155.62 +Shipping & Tax

  6. #6
    Orange cones fear me. cone-cerned's Avatar
    Join Date
    Dec 2005
    Location
    Woodbine, Texas
    Posts
    4,684

    Default

    Quote Originally Posted by POS Racing View Post
    Dang OEM has gone up a touch.

    NA23-33-04XA HUB,WHEEL $155.62 +Shipping & Tax
    I don't remember paying anywhere near that much. But, I don't remember how much I did pay. It was several years ago.
    On the track, I am fearless.
    If you were as slow as me, you wouldn't be afraid either.

    1994 M Edition
    CSP 67

  7. #7
    Orange cones fear me. cone-cerned's Avatar
    Join Date
    Dec 2005
    Location
    Woodbine, Texas
    Posts
    4,684

    Default

    I think that next time I replace the front hubs, I'll get the heavy duty competition ones from Mazdaspeed, 0000-04-5HUB-01. They are about $190 each, with std lug bolts.
    On the track, I am fearless.
    If you were as slow as me, you wouldn't be afraid either.

    1994 M Edition
    CSP 67

  8. #8

    Default

    Quote Originally Posted by cone-cerned View Post
    I think that next time I replace the front hubs, I'll get the heavy duty competition ones from Mazdaspeed, 0000-04-5HUB-01. They are about $190 each, with std lug bolts.
    You strike oil out there in Woodbine??

  9. #9

    Default

    Moog from Autozone online. They are from Japan and have NTN on the bearing covers. Usually around $100. Watch for $20 off for purchases over $100. I bought some $5 wipers to get the $20 off.
    '99 Emerald Green - 2015 NASA Texas TTE Season Champion (showing up is really 100% of it)

  10. #10
    Team Cheap Bastard
    President & Founder
    sammm's Avatar
    Join Date
    Jan 2004
    Location
    NC
    Posts
    6,457

    Default

    The Moog (for ABS) at RockAuto is $83. The Timken is a few dollars less.

    https://www.rockauto.com/en/moreinfo...387335&jsn=383

  11. #11

    Default

    Quote Originally Posted by sammm View Post
    The Moog (for ABS) at RockAuto is $83. The Timken is a few dollars less.

    https://www.rockauto.com/en/moreinfo...387335&jsn=383
    Noticed the Moog hub warranty is 3 years!
    1995 M Edition

  12. #12
    Tire Warmer Danny08's Avatar
    Join Date
    Nov 2017
    Location
    Dallas, TX
    Posts
    4

    Default

    Quote Originally Posted by wrx74 View Post
    Noticed the Moog hub warranty is 3 years!
    Wow, good to know... I've always thought these are 6 month or 1 year at max. Thanks for the info!
    Because I also have moogs from rockauto

Similar Threads

  1. Front wheel lift during turn
    By 865 in forum Autocross Tech & Technique
    Replies: 13
    Last Post: 10-28-2016, 12:20 PM
  2. tire trailer wheel bearings/seals
    By nealb in forum dfwMiata.com Classifieds
    Replies: 2
    Last Post: 05-04-2011, 02:26 PM
  3. Growly wheel bearings...
    By trickyrix in forum Miata Tech and Chat
    Replies: 5
    Last Post: 05-23-2007, 03:21 PM
  4. main bearings
    By Mouglie in forum Parts is Parts
    Replies: 5
    Last Post: 04-27-2007, 03:06 PM
  5. Pressing bearings
    By cam76034 in forum Miata Tech and Chat
    Replies: 6
    Last Post: 01-30-2007, 12:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •