1 ding 1 panel, I'm in.
I am having a guy push out some dents on my vehicles. He was referred to me by Gary from TDR. Magma can also attest to this guys ability.
He has agreed to work on other cars (after mine!) as well. So I will open this up on a first come first served basis.
When: Saturday September 9th. (11am?) He will be starting on my cars at 9am.
Where: McKinney near 75 and 380. (PM me for address)
The great deal is the cost. It is certainly CB approved. He will be charging us the wholesale cost of $25 per panel.
This is a fantastic deal! My Miata has 6 panels and lots of dents. He said mine should take 2 hours. The MPV only has two small dings that I want addressed. After that, anyone who wants this done, PM me.
Da Rules:
Try to give me an idea of how much work you need done. (Number of dents and number of panels)
I'll make a list in order of who contacts me first and post it here.
If you're not there at the time, we will skip over you to the next one in line so we can get as many cars done as possible.
1. black roadster
2. rudedog?
3. Mathews2004
We can chip in and order some Pizza if y'all want. Bring some drinks and I can keep them cold.
Put me down for around 5 dings on 2 or 3 panels.
Bad timing My car would take at least 4 hours, I need a raincheck That's a great deal.
Smile
93' LE #1136 - FM II
250k miles
hmmmm...I may have to make the trip North for this one!
Black Roadster send me a message or post here with time.
TIA.
Jack "Rude Dog" Hays
I'll See You On The Dark Side Of The Moon
I should really come out, but Sunny has so many it would probably be an all day job. Maybe Chris and I should rent him for a day..........
92 Sunny 214k, 95 Dimples, 93 James Bondo, 92 SM (Speedie Jr )
Shelley, Apex, Tigger, Max, Baby(cats), Fluffy, Spot, and Peanut (mini horses), Cinnamon & Bitsy(dawgs)
MSR #1001, SCCA #208822 Let's go racin'
That shouldn't be a problem except he stays pretty busy. Obviously. come winter time though I bet he won't have much going on.
Let me know if you are interested and I can give you his contact info or come out and socialize and see his work.
He lives in McKinney so I don't know how far he travels. Springtown may be a stretch!
Time listed in first post. Anyone feel free to come by and hang out.
PM me for details if you don't know my address.
We can chip in for Pizzas if y'all want. Bring some drinks and I can keep them cold.
I'm out. I just booked the wife on a flight in the morning to California for a funeral. I will be a single parent for the next 10 days.
Matthews2004 came by with his son and his wife's Bimmer. I got my MPV and the Roadster done and my Bro-in-law got his F-150 worked on as well. We are all very pleased with the results.
If anyone else needs dents removed, give him a call. He lives in McKinney but makes house calls as he doesn't have a brick and mortar. Don't know how far he'll travel.
His slow-time is obviously coming up in the next few months so you're more likely to find he has the time. Tell him you are with DFW Miata and he will give you the great deal of $25 per panel. His retail price is $40 per panel which is still reasonable. Hail damage or large dents require an estimate though.
The Dent Shop
Glenn Verhoev
469-233-5880
that was a great deal. Thanks for setting it up!
It looks like there could be another one of these geting set up by Adam. So if anyone missed out or couldn't make it let him know.
'06 RSX Type-S NBP
Yeah, if there's anybody interested, let me know. We kinda need a place to do it if anybody can volunteer :)
'02 Berlina S2k
J's 60RS, K&N FIPK, AUT CF cooling panel,
JDM sidemarkers, S badges, BYS emblems,
Mugen TP, 11.7:1 CR, Comptech Header,
Hello Kitty Mugen badge
'02 Berlina S2k
J's 60RS, K&N FIPK, AUT CF cooling panel,
JDM sidemarkers, S badges, BYS emblems,
Mugen TP, 11.7:1 CR, Comptech Header,
Hello Kitty Mugen badge