Page 1 of 2 12 LastLast
Results 1 to 20 of 37

Thread: Wheels....

  1. #1

    Default Wheels....

    Just wondering what everybody's opinions are on these. I'm pretty set on the Circuit 10's, but still slightly open to other suggestions.


    My #1 choice:



    Some other options:




    Damn I wish these would look good on red
    '02 Berlina S2k
    J's 60RS, K&N FIPK, AUT CF cooling panel,
    JDM sidemarkers, S badges, BYS emblems,
    Mugen TP, 11.7:1 CR, Comptech Header,
    Hello Kitty Mugen badge

  2. #2

    Default

    I like the last one best. I think it'd look good on a red car. Other than that, your first choice.

    I can't believe how high your estimate was. Hope you're back on the road soon.
    Smile
    93' LE #1136 - FM II
    250k miles

  3. #3

    Default

    Well, since you're looking for opinions, here are a few. These should, of course, be taken with much of that proverbial salt, as it took three years for me to pick wheels for my last car (ouch!).

    I find the Circuit 10 VERY busy looking. Seems as though it's be a pain to keep clean, as well.
    The Downshift looks like a squished version of the Boost, with a little too much of a bulging appearance where the spokes contact the barrel.
    SDX...I dunno. Something about it doesn't appeal. It seems very flat, which isn't a bad thing in itself. The fins at the center are a bit different.

    I really like the Boost, perhaps because of the depth of the spokes. 16s and up look great, but the 15s I've seen have been hit or miss.
    That version of the Slipstream is actually my favourite of the bunch. It's a very simple, basic design. The red lip actually would do well on a red car, depending on the shade of the coating used (and lack of wheel gap). They have that Time Attack/Volk look for a much lower price, too.

    Do you have pictures of any of these wheels on an RSX?
    '90 "LE" available for purchase soon
    2008.5 CWP MS3: JBR 70d trilogy engine mounts, short throw shifter & shift plate bushings; AST 4100 w/ 400lb springs f/r; JRZ camber plates

  4. #4

    Default

    I will get some pics... I have seen a red RSX w/ the same circuit 10's... looks good
    '02 Berlina S2k
    J's 60RS, K&N FIPK, AUT CF cooling panel,
    JDM sidemarkers, S badges, BYS emblems,
    Mugen TP, 11.7:1 CR, Comptech Header,
    Hello Kitty Mugen badge

  5. #5

    Default

    C10's




    Not my shade of red, but it gives an approximation... I run Hawk pads, so I like having a slightly darker wheel, damn dust.
    '02 Berlina S2k
    J's 60RS, K&N FIPK, AUT CF cooling panel,
    JDM sidemarkers, S badges, BYS emblems,
    Mugen TP, 11.7:1 CR, Comptech Header,
    Hello Kitty Mugen badge

  6. #6

    Default

    Rota Grids (as close as I could get to it)

    '02 Berlina S2k
    J's 60RS, K&N FIPK, AUT CF cooling panel,
    JDM sidemarkers, S badges, BYS emblems,
    Mugen TP, 11.7:1 CR, Comptech Header,
    Hello Kitty Mugen badge

  7. #7

    Default

    Torques
    '02 Berlina S2k
    J's 60RS, K&N FIPK, AUT CF cooling panel,
    JDM sidemarkers, S badges, BYS emblems,
    Mugen TP, 11.7:1 CR, Comptech Header,
    Hello Kitty Mugen badge

  8. #8
    Obnoxious at any speed altiain's Avatar
    Join Date
    Jan 2004
    Location
    Far south Dallas (Austin)
    Posts
    10,458

    Default

    I like the Torques better than the C10s, personally.
    Iain

    "We don't stop playing because we grow old, we grow old because we stop playing." - George Bernard Shaw

  9. #9

    Default

    Those are all the pics I can find without digging too deep. There's one white RSX w/ the red/black slips, but his pics are crappy and the red doesn't show up. Which is what I would worry about w/ that wheel. Flat black just doesn't look that good on red, I think. Volk has 2 versions of this, the flat black is the more popular, but the gloss black one is the better looking one (and much rarer).


    FWIW, I will be getting 17x7.5's. Most of the RSX's pictured here are on 17's as well.
    '02 Berlina S2k
    J's 60RS, K&N FIPK, AUT CF cooling panel,
    JDM sidemarkers, S badges, BYS emblems,
    Mugen TP, 11.7:1 CR, Comptech Header,
    Hello Kitty Mugen badge

  10. #10

  11. #11

    Default

    I think the slips would look sick on your car and give it a mean look
    I'm not speeding officer, I'm qualifying!!!

    92 Red (sold)
    2006 ZX6R 636 (sold)
    99 S10 ZQ8 (sold)
    95 Merlot M
    05 GSXR 600 (To buy my house)

  12. #12

    Default

    Circuit 10's or Grids in Bronze.

  13. #13

    Default

    Thanks for the pictures, Adam! The Circuit 10s look a ton better on the car than just lying around. The dark colour does well, too. Gold and bronze tend to do nicely on red cars, imo.

    The silver Grids look decent, as well, but not as much as I'd expected. How about this lovely wheel? Just thought I'd throw it out there...
    '90 "LE" available for purchase soon
    2008.5 CWP MS3: JBR 70d trilogy engine mounts, short throw shifter & shift plate bushings; AST 4100 w/ 400lb springs f/r; JRZ camber plates

  14. #14
    Obnoxious at any speed altiain's Avatar
    Join Date
    Jan 2004
    Location
    Far south Dallas (Austin)
    Posts
    10,458

    Default

    Quote Originally Posted by juxt3r View Post
    Thanks for the pictures, Adam! The Circuit 10s look a ton better on the car than just lying around. The dark colour does well, too. Gold and bronze tend to do nicely on red cars, imo.

    The silver Grids look decent, as well, but not as much as I'd expected. How about this lovely wheel? Just thought I'd throw it out there...
    Mmmm... Time Attack TE37s. I want a set of those for the '8. Too bad I'd have to sell the car to afford the wheels.
    Iain

    "We don't stop playing because we grow old, we grow old because we stop playing." - George Bernard Shaw

  15. #15

    Default

    Here's a CE28N, the gold/polish C10's are pretty much the same look. This one is... interesting... to me; I was leaning more towards bronze until I saw these and got all confused . I'd hit the CE28N's (or the Time Attacks) in a heartbeat if I had the cash for them.

    '02 Berlina S2k
    J's 60RS, K&N FIPK, AUT CF cooling panel,
    JDM sidemarkers, S badges, BYS emblems,
    Mugen TP, 11.7:1 CR, Comptech Header,
    Hello Kitty Mugen badge

  16. #16

    Default

    Quote Originally Posted by juxt3r View Post
    Thanks for the pictures, Adam! The Circuit 10s look a ton better on the car than just lying around. The dark colour does well, too. Gold and bronze tend to do nicely on red cars, imo.

    The silver Grids look decent, as well, but not as much as I'd expected. How about this lovely wheel? Just thought I'd throw it out there...
    I was thinking the same about bronze/gold on red.

    Those "Grids" were actually bronze TE-37's

    I've never seen that RSX, love the TA's and the bumper on it
    '02 Berlina S2k
    J's 60RS, K&N FIPK, AUT CF cooling panel,
    JDM sidemarkers, S badges, BYS emblems,
    Mugen TP, 11.7:1 CR, Comptech Header,
    Hello Kitty Mugen badge

  17. #17

    Default

    Quote Originally Posted by juxt3r View Post
    What the hell is this? I haven't seen that car before, an 08 model maybe or photoshop? Looks like they need some photoshop tutorials cause the side skirts are obviously fake.

    Those Torque wheels look wicked! Haven't seen those yet.
    90 MX5 281k miles! - euro spec, Porsche Riviera Blue w/black hardtop, 97 motor swap, vintage Borbet rims, GC, FM shock hats/frame rails/rear sub-brace, AGX, sway bar, stb, Fidanza/ACT combo, EBC Yellows

    92 COMMA SM - new paint coming soon...

  18. #18

    Default

    Quote Originally Posted by icepenguin66 View Post
    What the hell is this? I haven't seen that car before, an 08 model maybe or photoshop? Looks like they need some photoshop tutorials cause the side skirts are obviously fake.

    Those Torque wheels look wicked! Haven't seen those yet.
    That's a Mugen front-end, not sure on the side-skirts, but probably Mugen as well (and definitely not fake, I've seen them on plenty of other RSX's). This is an 02-04 RSX.
    '02 Berlina S2k
    J's 60RS, K&N FIPK, AUT CF cooling panel,
    JDM sidemarkers, S badges, BYS emblems,
    Mugen TP, 11.7:1 CR, Comptech Header,
    Hello Kitty Mugen badge

  19. #19

    Default

    those are the Mugen sides
    I'm not speeding officer, I'm qualifying!!!

    92 Red (sold)
    2006 ZX6R 636 (sold)
    99 S10 ZQ8 (sold)
    95 Merlot M
    05 GSXR 600 (To buy my house)

  20. #20

    Default

    Rota Grid in Bronze
    Thomas
    V-to-the-Dub

Page 1 of 2 12 LastLast

Similar Threads

  1. Wanted 15 x 7.5" wheels
    By nealb in forum Parts is Parts
    Replies: 15
    Last Post: 01-17-2007, 12:02 PM
  2. Sold: Set of 15" 1999 stock wheels
    By Kestrel in forum dfwMiata.com Classifieds
    Replies: 19
    Last Post: 10-31-2006, 02:05 PM
  3. Ever had your wheels stuck to the hubs??
    By Jiggerachi in forum Miata Tech and Chat
    Replies: 13
    Last Post: 07-12-2005, 11:17 AM
  4. Super cheap deal on 15" & 17" Konig wheels!
    By altiain in forum Parts is Parts
    Replies: 39
    Last Post: 05-11-2005, 01:12 PM
  5. Thinking About Wheels & Tires
    By srivendel in forum Autocross Tech & Technique
    Replies: 7
    Last Post: 02-04-2005, 01:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •