Reply With QuoteHarbor Freight!
....then when the rest of us have a 'Pressing Issue'.....
Machine shop on the Westside
Need to get some upper a-arm bushings pressed in an out on the 'lac.
Figure I can pull the upper a-arms myself and can deliver.
Anyone got any recommendations of a shop on the westside?
Your kind of place!
Harbor Freight!
....then when the rest of us have a 'Pressing Issue'.....
For this job I'd rather take it to someone rather than attempt it on my own.
The upper A-Arms from what I have read can be tricky on these old 'lacs and I'd rather not be the one at the controls of the press if something gets bent.
I have a press. If you weren't such a bigOriginally Posted by POS Racing
you could borrow it.
What's left of a '96 Miata with stock clutch.
My car exceeds my driving ability. That's the only possible explanation.
Ding!! Ding!! Ding!! We have a winner!He sells them, so maybe he understands his limits better than we do
Visit www.harrisonindustrial.com for all your precision fabricating, stamping, tube forming, and structural equipment needs.
Test test test is this thing on???
Wow that is absolutely no help at all but I appreciate your effort!
What you offer up is like just randomly picking Miata Technologies out of the phone book since they have the prettiest ad!
What I am looking for is a recommendation from someone who has found and used a machine shop for a similar project.
It is really surprising that no one has spoken up. I would have thought that most of the forum members would have needed to have A-Arm bushings removed from a 40 year old American tank at one time or another.What I am looking for is a recommendation from someone who has found and used a machine shop for a similar project.
Or at least had it done on a Miata or other vehicle. I'm not the only kid with an old car on this forum (Nash, Mid Year Vette, Thunderbird, Edsel, and so on).It is really surprising that no one has spoken up. I would have thought that most of the forum members would have needed to have A-Arm bushings removed from a 40 year old American tank at one time or another.
I do have a call in to the local Cadillac club (they aren't reall big on the interweb) to see if they have anyone that they use.
I also have a guy in Saginaw that has offer to help me out!
It seems to me that every thread on Miata bushing changes points to AJ. Not sure if anyone has done it on their own.Or at least had it done on a Miata or other vehicle. I'm not the only kid with an old car on this forum (Nash, Mid Year Vette, Thunderbird, Edsel, and so on).
I do have a call in to the local Cadillac club (they aren't reall big on the interweb) to see if they have anyone that they use.
I also have a guy in Saginaw that has offer to help me out!
jrj512 changed all the rear bushings in his Miata but he had some help.
Coming up on time to do the fronts.jrj512 changed all the rear bushings in his Miata but he had some help.
Posting Permissions
