Page 1 of 2 12 LastLast
Results 1 to 20 of 24

Thread: FS: With more to come

  1. #1

    Default FS: With more to come

    Big Brake Kit - $800 Comes with Stainless Steel Braided lines <PENDING>

    HardDog Hardtop Sport bar (Double Diagonal) With padding $300 <SOLD>

    Hard Top White (Rear Defroster) - $1000 <SOLD>

    2 Sparco Speed Seats (Used in good condition) - $250 for both <SOLD>

    UltraSheild 5 pt Harness (New Never used) <NOT A CAMLOCK> - $100 <BUY ME NOW>
    (Eye Bolt Hardware not included)

    Two used Tan Leather Seats <Make an offer>

    Two Doors and Door Panels <Make an offer>

    Interior Carpet and Floor Mats <Make an offer>

    Dash <Make an offer>

    Used 5 speed Transmission and Torsen Rear end - (Off the market at the moment)

    More items to come in the near future
    Last edited by MiataMike; 11-24-2008 at 08:06 PM.
    Blah blah blah!

  2. #2

    Default

    I thought you were getting another Miata to move the stuff over to?

  3. #3

    Default

    Does the torsen have a 4:30 or 4:10 gears? Is the housing in good shape?
    92 Sunny 214k, 95 Dimples, 93 James Bondo, 92 SM (Speedie Jr )
    Shelley, Apex, Tigger, Max, Baby(cats), Fluffy, Spot, and Peanut (mini horses), Cinnamon & Bitsy(dawgs)
    MSR #1001, SCCA #208822 Let's go racin'

  4. #4

    Default

    Quote Originally Posted by Titus View Post
    I thought you were getting another Miata to move the stuff over to?
    I do have another miata that all is getting moved over to. These are just some left over extra parts.
    Blah blah blah!

  5. #5

    Default

    Quote Originally Posted by MadMerv View Post
    Does the torsen have a 4:30 or 4:10 gears? Is the housing in good shape?
    I'm not sure what the ratio is of the Torsen coming out. I can ask AJ <BAM> and he can give some more input as to what ratio it has.
    Blah blah blah!

  6. #6

    Default

    PM'd regarding seats.

    Chris
    91 Miata (#3), Rattle Can Grey(previous owner), Greddy Turbo @7 PSI and Manifold (Only items remaining from the kit), TDR I/C, Godspeed Radiator, RM DP, 2.5 Enthuza Bipes, BEGI AFPR, ACT, Lightened Stock Flywheel, Yellow Konis, FCM on Stock Springs, HDM2S, MOMO Wheel, Ratsback Front CF Lip, Black Rota's on EcstaXS, Corrado Rotors & XP8's on Front w/ 1.8 rears.

    http://austinmiata.com/

    Wishlist: Megasquirt to run 12-13 PSI, White non-spray paint job, 8" 6UL's, RX7 LSD, Evans Waterless Coolant

  7. #7

    Default

    PM'ed you about the hardtop.

  8. #8

  9. #9

    Default

    Quote Originally Posted by MadMerv View Post
    Does the torsen have a 4:30 or 4:10 gears? Is the housing in good shape?
    We didn't find any distinctive marks on the Diff to determine a difference between the two.

    Can you tell us something that we can look for to distingish the different ratios?
    Blah blah blah!

  10. #10

    Default

    its a 4.30 if it came out of an NB, right?
    TXMC: Drinkin, shootin, racin!

  11. #11

    Default

    the MSM had 4.10's, not sure about the rest of the NB's
    2005 Lava Orange MSM #601/1428
    211 rwhp, 195 ft. lbs on 1/6/07

  12. #12

    Default

    Quote Originally Posted by mr brg View Post
    its a 4.30 if it came out of an NB, right?
    Depends on the transmission. Some were 4.30 and some were 3.90's.

  13. #13

    Default

    No distinguishing marks.......
    92 Sunny 214k, 95 Dimples, 93 James Bondo, 92 SM (Speedie Jr )
    Shelley, Apex, Tigger, Max, Baby(cats), Fluffy, Spot, and Peanut (mini horses), Cinnamon & Bitsy(dawgs)
    MSR #1001, SCCA #208822 Let's go racin'

  14. #14

    Default

    http://members.aol.com/solomiata/Drivetrain.html
    http://members.aol.com/solomiata/RingandPinion.html

    The 1990-93 rear had 4.30:1 gears and there are no factory alternate ratio's available (an aftermarket 4.875 ratio is available). Mazda OEM Gears currently available new for the later 1994+ differential assembly are 3.636:1, 3.909:1, 4.10:1, 4.30:1, 4.44:1, 4.625, and 4.778.
    The 4.10:1 and the 4.30:1 came on the 1994-97 and '99+ Miata respectivley(sic) (4.10:1 on automatic starting in 2000).
    Chris
    91 Miata (#3), Rattle Can Grey(previous owner), Greddy Turbo @7 PSI and Manifold (Only items remaining from the kit), TDR I/C, Godspeed Radiator, RM DP, 2.5 Enthuza Bipes, BEGI AFPR, ACT, Lightened Stock Flywheel, Yellow Konis, FCM on Stock Springs, HDM2S, MOMO Wheel, Ratsback Front CF Lip, Black Rota's on EcstaXS, Corrado Rotors & XP8's on Front w/ 1.8 rears.

    http://austinmiata.com/

    Wishlist: Megasquirt to run 12-13 PSI, White non-spray paint job, 8" 6UL's, RX7 LSD, Evans Waterless Coolant

  15. #15

    Default

    Some items updated. Roll bar is up forsale as well.
    Blah blah blah!

  16. #16

    Default

    Quote Originally Posted by MiataMike View Post
    Some items updated. Roll bar is up forsale as well.
    PM sent.
    '94 Black & Black & Tan
    '99 head swap, JR header, TDR intake & header blanket, MegaSquirt, RB hollow bar, Tein Flex, 15x8 6ULs, HD M2 Sport, FM cat, Borla cat-back, black '95M interior, MOMO Zebrano, IL Motorsport console...

    Dyno Days
    8/16/08 (bone stock): 103.1 hp/99.0 lb-ft - Dynojet
    8/23/08 (Borla cat-back): 108.2 hp/104.1 lb-ft - Dynojet
    8/13/11 (more stuff...): 126 hp/116 lb-ft - Mustang dyno

    Roger Moore: the Danny White of James Bonds

  17. #17
    Chassis Designer
    Join Date
    May 2008
    Location
    Providence Village, TX
    Posts
    148

    Default

    I will be interested in the seats, belts, and torsen if you still have them next week. What year is the rear end out of?

  18. #18

    Default

    Quote Originally Posted by Justin Tyme View Post
    I will be interested in the seats, belts, and torsen if you still have them next week. What year is the rear end out of?
    The seats I have promised to my dad; but I will get his seats in return. (They are in good condition for 8+yrs old)

    The belts I'm assuming you mean the racing harness. those are still around.

    The rear end came out of a '99 miata 5 speed tranny. I believe that is the 3.9 ratio but not 100%
    Blah blah blah!

  19. #19
    Chassis Designer
    Join Date
    Jun 2007
    Location
    Arlington
    Posts
    147

    Default

    Is the rollbar obo : )? Worth a shot, trickyrix probably took it.
    '95R

  20. #20
    Chassis Designer
    Join Date
    May 2008
    Location
    Providence Village, TX
    Posts
    148

    Default

    What kidn of seats?

    How long is the harness good for?

    I am looking to get a 4.3. If you will sell it for cheap enough then I guess I can pick up a set of diff gears and swap it over. Any way you can find out what it is for sure?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •