NARDI steering wheel

[larryd]

i scored a Nardi Torino steering wheel, black leather wrapped for a good price off of an NB. i want to use it on my NA but the air bag connectors are totally different. anyone know of a way if possible to change out the connectors so it'll work on my NA?

[trickyrix]

THIS might help.

[driftdevil]

Just cut the ends of each one off and splice them together. And you have to drill the holes for the clock spring to work right like on the NA wheel.

[imsuchanoob]

if you follow those instructions, unplug the battery for at least 30 minutes or make a hospital visit! LOL

[larryd]

i was going to try to make jumper wires for the three pins on either side, except i don't know where to start looking for the connectors themselvess. i'll let you know if i can pull this off.

[larryd]

does anyone have the airbag connector and wires off the back of a NA steering wheel. I need the connector to wire in my NARDI steering wheel.

[Jiggerachi]

I've got the airbag in the garage waiting for an appropriate time and place to detonate it

I can give you the connector off the bag since i'll be cutting it off anyway. This is off a '94, don't know what year yours is or if the connectors are any different pre '94.

I thought about doing the same airbag splicing thing before when I was about to buy an NB wheel, but I chickened out of the NB wheel and went with a Momo due to the whole clockspring thing. Now that I tackled the Momo and had to fool around with my crappy ebay adapter im sure fitting the NB clockspring locations would be a piece of cake.

[larryd]

let me know when you fire it off! i drilled two hole in the back of the NB steerer and it seems to work fine.

[Jiggerachi]

Do you still need the airbag connector? I can cut it off and give it to you anytime.

[larryd]

yeah, send me a message [email protected]

i live in corinth just south of denton