FS - NA Racing Beat Solid front bar 15/16"

[POS Racing]

For Sale one pre-owned Racing Beat Solid front bar 15/16"!
It's in great shape used by an old man to drive around parking lots on Sundays!

More information on the bar here -> http://www.racingbeat.com/Miata-1990...ars/54102.html




$80.00

[GregW]

I want it, but I have a 91 and it says it's for a 94-97. What's the difference?

[POS Racing]

Found this on the racing beat website.

Specifications
The diameter of the Racing Beat front bar is 15/16", and weighs 10 lbs. (Stock - .3/4" diameter, 6 lbs.) and features one (1) endlink attachment hole. Each sway bar is supplied with replacement urethane bushings, Prothane grease, and detailed installation instructions. The shape of this bar is dimensionally identical to the 1990-93 Racing Beat solid bar, but the bar arms on the 1994-97 bar are slightly longer due larger 1.8 liter engine.

I think I have an old stock front bar in the attic off my '92 I'll see if I can dig it up and compare it to the Racing Beat Bar.

[jrj512]

Since RB went so far as to create different bars, then you might be playing with fire if you try to mix-and-match.

[POS Racing]

Since RB went so far as to create different bars, then you might be playing with fire if you try to mix-and-match.

You just lost your commission on this sale jrj512!

But a very good point!

[motorollow]

Do you need adjustable endlinks for this bar or do you just use the stock endlinks?

[POS Racing]

Do you need adjustable endlinks for this bar or do you just use the stock endlinks?

I ran it with stock endlinks.

[BFPW]

Wish I had the money.

[POS Racing]

I think I have an old stock front bar in the attic off my '92 I'll see if I can dig it up and compare it to the Racing Beat Bar.

So I climbed up in the attic and found 2 OEM front bars. IIRC the one with the brackets zip tied to the bar is the one off my '94 the one without is off my '92.

Both OEM bars appear to be dimensional the same??

Here are the pictures with the racing beat bar:

[POS Racing]

No comment on how there doesn't seem to much of a difference on the 3 bars??

[jrj512]

Looks like that newspaper subscription is paying off.

[POS Racing]

Looks like that newspaper subscription is paying off.

Odd you should mention that my next door neighbor keep bellyaching that someone keeps taking his paper. Go figure!

[wrx74]

No comment on how there doesn't seem to much of a difference on the 3 bars??

Look HERE and notice the fitment of later model swaybars on 90-93 models. Seems to have much to do with the location of the holes in the ends.

[POS Racing]

Still available!

[Matt V]

Will it fit my 90? If so I might take it.

[sammm]

Found this on the racing beat website.I think I have an old stock front bar in the attic off my '92 I'll see if I can dig it up and compare it to the Racing Beat Bar.

Specifications
The diameter of the Racing Beat front bar is 15/16", and weighs 10 lbs. (Stock - .3/4" diameter, 6 lbs.) and features one (1) endlink attachment hole. Each sway bar is supplied with replacement urethane bushings, Prothane grease, and detailed installation instructions. The shape of this bar is dimensionally identical to the 1990-93 Racing Beat solid bar, but the bar arms on the 1994-97 bar are slightly longer due larger 1.8 liter engine.

Will it fit my 90? If so I might take it.

RIF

[POS Racing]

Will it fit my 90? If so I might take it.

Maybe! If you look at the comparison pictures above it looks like almost identical in dimensions to both my OEM stock front sway bars.

[Matt V]

Ill get back to you soon.

[POS Racing]

First person who gives me will get it!!

[POS Racing]

Now for my favorite part.

It is SOLD !