Results 1 to 7 of 7

Thread: WTB: Tan glove box and latch, black hood for the gauges, and a few other things

  1. #1
    Chassis Designer
    Join Date
    May 2010
    Location
    Carrollton, TX
    Posts
    96

    Default WTB: Tan glove box and latch, black hood for the gauges, and a few other things

    Like the title states, I'm looking for a tan glove box and latch, black hood for the gauges I was quoted $55 for one and $40 for the other, honestly don't know if that is cheap or expensive.

    Also looking for
    one of the lenses for the front left turn signal, one of the screws for it, and if anyone knows where to get the plastic tabs that hold the rear carpet down that would be great.

    Thanks David.

  2. #2
    Prefers his T-Bones Deboned... jeff_man's Avatar
    Join Date
    Dec 2006
    Location
    dallas
    Posts
    2,133

    Default

    miatamike has a tan glovebox

  3. #3

    Default

    what year? THe 90-93 and 94-97 and 99+ all have different glove boxes. I have a tan 90-93 glove box lid I'd sell.

    As for the trim clips the ones @ the auto parts stores are good enough
    David Hedderick
    Houston, TX
    92 Miata SE; 08 Mazda 3s; 12 Mazdaspeed 3

  4. #4

    Default

    If it is a 94-97 you need, let me know and I will dig around to see if I still have the one from my parts car.

  5. #5

    Default

    Is your glovebox missing or just in bad shape? If its a 94 and titus doesn't have it I have one. Its got scratches on the front but if its in better shape than yours ill just give it to ya. The latch is broken though.

    Honestly I think you'll be hard pressed to find a used glove box with a working latch. I went to Mazda Heaven looking for a replacement for my broken latch. Every car out there had a latch broken in the same place. There was one or two in good condition that had the latch removed. This lead me to believe this was a very commom issue. Good news though, you can buy the latch new from Rosenthal Mazda for $12 or so. Probably close to what a junk yard would charge you anyway.

    Edit: here's a link http://finishlineperformance.com/sto...cat=296&page=3
    Last edited by Jiggerachi; 06-05-2010 at 07:36 AM.
    '94 C-Package Black & Tan | MS3x | exhintake | USDM Tein Monoflex 10/8k | My 8 year roadster evolution

  6. #6
    Chassis Designer
    Join Date
    May 2010
    Location
    Carrollton, TX
    Posts
    96

    Default

    Sorry I've been out all day, I picked up a new latch the night before off ebay because that's all I needed.

    Still need a gauge pod hood as mine is broken, and a blinker light lense for the driver's side.
    94 M edition-Stock

  7. #7

    Default

    Quote Originally Posted by jeff_man View Post
    miatamike has a tan glovebox
    I have both of those parts
    Blah blah blah!

Similar Threads

  1. WTB: glove box and center console lid for NB (black)
    By goofygrin in forum dfwMiata.com Classifieds
    Replies: 3
    Last Post: 05-22-2010, 12:09 AM
  2. NA parts needed (black hood, black front bumper cover)
    By Black_devil_miata in forum dfwMiata.com Classifieds
    Replies: 1
    Last Post: 02-19-2010, 09:22 PM
  3. WTB: Hood and trunk lid (NA/Black)
    By SixAce in forum dfwMiata.com Classifieds
    Replies: 4
    Last Post: 01-29-2008, 07:26 AM
  4. Race Gauges
    By black roadster in forum Parts is Parts
    Replies: 12
    Last Post: 10-16-2007, 02:04 PM
  5. WTB: 93LE glove box door, seatbelts, driver seat
    By juxt3r in forum dfwMiata.com Classifieds
    Replies: 5
    Last Post: 07-04-2007, 06:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •