FS: 1.6l Racing Beat hollow front sway bar with extras, 1.6 vcg BNIB

[Rob®]

Racing Beat Front Tubular Sway Bar with Sway Bar Brace Kit Hardware and SuperMiata (949 Racing) Endlinks:

That's a lot going on, so some links first:
Sway bar: http://www.racingbeat.com/Miata-1990...ars/54104.html
Brace Kit Hardware: http://www.racingbeat.com/Miata-1990...ars/54123.html
End Links: http://949racing.com/SuperMiata-miata-end-links.aspx

Pics of the stuff I'm selling:


This is everything you'd get


Closer view of the smaller items


Closer view of one of the endlinks

Notes:
- RB bar and blocks installed 11/8/2008, 16,765 miles ago
- End links installed 8/8/2012, 2,605 miles ago
- I am selling this as a package - I will not split it up
- The brace kit is for power steering cars. Well, it works with PS or non-PS cars
- The sway bar bushings are NOT trimmed: I used washers between the mounts and the subframe so the bar wouldn't bind. You can do the same (most logical) or you can shave the bushings like some people do. Or, naturally, you can do neither and possibly have binding issues. This is a very well known issue, I'm just pointing out what the washers are for in the pics
- I do NOT have any of the grease you get from RB. You'll have to figure that out on your own (not a hard thing to locate)
- Notice the end links are out of stock. I've heard this has been the case for a good while now. If you want just the end links, buy the entire package, and sell everything else for whatever you can get.

Brand new, all this stuff adds up to $271 +shipping...minus the fact you can't even get the end links right now. I want $150 since the only parts considered wear items are practically brand new, and even the other stuff doesn't have a ton of mileage on it.

[modernbeat]

Rob, if you come to Keller's this week I'll take the valve cover gasket from you in person.

[Rob®]

If you'll be there fairly early, I could swing that right after work.

[modernbeat]

7pm ish? Can't really leave work until after 6pm and I'm often here until 8pm or so.

[Rob®]

That should work out fine. I'd be leaving Denton at 6pm or so. I meant "early" as in not showing up at like 10 like I remember some people doing/saying. So we're good.

[Rob®]

VCG is sold, swaybar stuff is still available. Price is OBO if that isn't clear. I'd like to think I'm easy enough to work with on this stuff.

Oh, I grabbed a tube of grease for the swaybar from work, so you don't even need to source that anymore.

[Rob®]

Anybody?

[Sharpie]

You have an unrelated PM.

[Rob®]

Bar is sold.