*SOLD* FS: 1 Project Miata

[channelmaniac]

OK,

Time to be realistic: I have no time to finish this SCCA Spec Miata project car. I have a full time job and a web based business on the side. I'm looking to expand my business and I need the room. I can also use the cash for inventory.

Up for sale: 1 early model 1990 Miata - Spec project car

The good:

• Engine & transmission replaced.
• Aluminum radiator installed (bought from Track Dog)
• Comes with hard top
• Custom cage has already been welded in (Black Racing in Garland)
• Seat belt tower blanking plates
• Plexi drop in driver's side window
• Power window on passenger side (switch on plate where radio was)
• Momo suede wheel with quick disconnect (NOT a cheap disconnect either)
• Speed Bleeders (fluid has been flushed and calipers serviced)
• New clutch slave (fluid has been flushed)
• Steering wheel lock disabled
• Replaced the beauty panel on the back of the car
• Exinguisher, fuel test port, window netting, kill switch, spinduction intake, a Kirkey racing seat with an OK Miata mount installed.
• Spec Miata cat-back exhaust and Kazera KZ-M rims are there but need installing.
• Has Millen Panasport rims on it right now with some all season radials. Good for moving the car around the garage.
• Replacement clutch and new lifters in boxes as spare parts
• 3" cam lock harness in box waiting to be installed
• Comes with an extra racing seat

The bad:

• Needs paint and reassembly of the interior
• Has hail damage and needs paint on the outside

Needs to be done:

• Spec Miata cat-back installed
• Cage needs to have the painting finished
• Rear deck needs to be fit around the cage and reinstalled.
• Seat belt tower blanking plates need installing
• Seat needs to be reinstalled
• Harness needs installation
• Hail damage needs body filler
• Exterior needs paint
• Needs the Spec Miata suspension kit (not supplied - I haven't bought it yet)

If you followed the build on the cardomain page I had set up you'll know I sank a lot of money in little parts. There are extra little parts that go with the car too such as seals, nuts, bolts, studs, and more.

http://www.cardomain.com/ride/2115071 to see much of what has been done.

The cage was $2500, the car was about $950, the hard top was $750, and the rest was even more. Somewhere I have a pile of receipts for things I've purchased.

As you can see, it's really not that far from being finished. Technically you can get it on the track after paint & reassembly of the interior. You'll need to get and install the suspension kit, finish the build, then have it inspected to get the log book for it.

$4,000 and I have the clear title.

Car can be seen in my garage. PM me to schedule a time.

Thanks,

Raymond

[channelmaniac]

Tentatively sold.

I have a down payment on it and a pickup date where the buyer is bringing cash.

Sold - 8/4/2009