wtb 1.8 cat

I need to replace my 1.8 cat due to all 4 studs are striped out..or dose anyone know a place that would punch out my striped studs..

Just knock them out carefully with a BF hammer, then use regular bolts/nuts.

yeeeeaa!! i try that and it didnt wrk..i even used a air hammer still didnt wrk..so then i try a cut off wheel and cutted off the stud and head and took all freakn day to drill out the stud..lol

Quote:

---

Originally Posted by 1.8-M

I need to replace my 1.8 cat due to all 4 studs are striped out..or dose anyone know a place that would punch out my striped studs..

---

I have one if you'd like to buy it. It's from my '94 with 84k miles. Just passed emissions with flying colors 3 weeks ago. PM me if you're interested.

Quote:

---

Originally Posted by Mark52

Just knock them out carefully with a BF hammer, then use regular bolts/nuts.

---

Good luck with that BFH, since they screw in. ;)

Deep Creep and Vice Grips usually get them, unless its on a 95M.

Quote:

---

Originally Posted by Rogue

Good luck with that BFH, since they screw in. ;)

Deep Creep and Vice Grips usually get them, unless its on a 95M.

---

::Hmm::::Bleh::