Keisler Front and Rear Drop Spindles for Miata NA/NB

Keisler Front and Rear Drop Spindles for Miata NA/NB

$850

Keisler Drop Spindles for Miata NA/NB
Both front and rear

•1.5 inch drop
•Correct suspension and steering geometry which reduces/eliminates roll couple increase, corrects factory camber curve, and bump steer caused by lowering via springs/coil over.
•3 Degrees negative camber built in the spindles
•2.33 pounds vs. OEM 5.48 pounds (68% lighter)
•Far superior strength over OEM
•Machined from 6061-T6 aluminum
•Highly durable Electroless nickel plating
•Uses Mr2 spyder front hubs which have much greater bearing life and overall strength. They are readily available at local auto parts stores in both house brand and Timken at reasonable prices. Timken part number - HA595017
•ABS sensors are incorporated into the hubs.
•Hub fasteners included with spindles.
•Fits NA and NB models

What generation are these?

1st Gen. You will want 2nd gen if you are drifting. But for autocross and track use, either one is fine.

I have the fronts , interested in selling just the rears?

Quote:

---

Originally Posted by rvtrcr

I have the fronts , interested in selling just the rears?

---

For about $550 maybe.

...or, you can buy both and resell the extra fronts.

Sent PM

Sold