Time To Cruise (M1)

Sammm is attempting to add cruise control to his CB Racer. We are using the POS Racer as a guide!

http://www.harrisonindustrial.com/im...ta/Cruise1.JPG
http://www.harrisonindustrial.com/im...ta/Cruise2.JPG
http://www.harrisonindustrial.com/im...ta/Cruise3.JPG

My car has 14 Wires going into the cruise control computer box. 8)

There are 6 on one row of the plug, and 8 on the other row of the plug. 8) I unpluged it from the box so I could get a better view of the wires.

The row with eight wires has the following wires.
|Green/Black|Black/Yellow|Yellow|Black/White|Red/Blue|Red/White|Green/Pink|Black|

The Row with six wires has the following wires>
|Green/Yellow|Green/Tan|Red|Green|Pink|White/green|

Don't you have a shop manual in handy PDF format?

Quote:

---

Originally Posted by tailchaser

Don't you have a shop manual in handy PDF format?

---

Why yes I do! 8)
I have the same number of wires/colors as POS, the actuator under the hood does connect to the accel. pedal thru the firewall. Everything matches up EXCEPT the main cruise switch on the lower left dash. Different plug profile than the one in my dash. :?

Is this the one you are talking about?

The POS's Main Cruise Switch! 8)

http://www.harrisonindustrial.com/im...ta/Cruise4.JPG
http://www.harrisonindustrial.com/im...ta/Cruise5.JPG
http://www.harrisonindustrial.com/im...ta/Cruise6.JPG

Quote:

---

Originally Posted by POS Racing

Is this the one you are talking about?

---

Yep, that's the one. The plug behind the dash is a rectangle, with 3 pins on top, and 3 on the bottom. The switch I got has 4 pins on top and 2 on the bottom with 2 'dividers' on the bottom section. I also notice that I only have 4 wires in the run, and you have 6. I have a feeling that's probably where that infamous speed-sensor wire is! I think I'm SOL on the factory cruze. :(

POS - no luck finding the correct plug hiding behind the dash somewhere. Audiovox here I come!

So the rumors are true that it is a PITA to add factory cruise to a pre '94 Miata....... :(

Quote:

---

Originally Posted by POS Racing

So the rumors are true that it is a PITA to add factory cruise to a pre '94 Miata....... :(

---

If the wiring was there, it's would be a piece of cake! If not, it is probably not worth the effort.

I just placed an order for the Audiovox CCS-100 cruise control unit! When is the next Tech Day scheduled for?!?!?! :wink:

http://www.audiovox.com/images/produ...rge/CCS100.jpg

Quote:

---

Originally Posted by sammm

I just placed an order for the Audiovox CCS-100 cruise control unit! When is the next Tech Day scheduled for?!?!?! :wink:

---

Well we have some folks wanting to clean throttle bodies, and your cruise install. Sounds like we could use a tech day! :wink:

When is you cruise due to arrive?

Quote:

---

Originally Posted by POS Racing

When is you cruise due to arrive?

---

I give up, when? :wink: I haven't got a tracking number or anything yet. I hope it will be here before the end of next week.

How do you clean throttle bodies? (regular use of Techron?)..

thanks pos, I just noticed the other thread. (My bad....)

PS: you sure were quick on the reply....

Quote:

---

Originally Posted by bigDstars

How do you clean throttle bodies? (regular use of Techron?)..

---

:shock: http://forums.dfwmiata.com/viewtopic.php?t=384