Failed Inspection Sniff Test - 4 Times! Help!
Okay... here's the situation... I've now failed the inspection sniff test three times. This is getting ridiculous...
Here's what we know so far:- Replaced spark plugs
- Replaced spark plug wires
- Replaced O2 sensor
- Set timing back to 10 degrees
- Using a FM high flow cat (that does work!)
- Using 87/89 octane gas from 7/11
Here are the numbers:
First Test -
High Speed Emissions Results (25 mph)
--------------------------Standard ------Current------ Result
HC (PPM) -------------------160----------- 12--------- PASS
CO (%) ---------------------.90----------- .02--------- PASS
CO2 (%) ----------------------------------14.4
O2 (%) ------------------------------------1.0
NOx (PPM) ------------------1179--------- 2340-------- FAIL
Dilution (%) ------------------>6---------- 14.4
Low Speed Emissions Results (15 mph)
--------------------------Standard -------Current ------Result
HC (PPM) -------------------166------------18--------- PASS
CO (%) ---------------------.93 ------------.03 --------PASS
CO2 (%) -----------------------------------14.2
O2 (%) -------------------------------------1.1
NOx (PPM) ------------------1304-----------2685--------FAIL
Second Test - Replaced Spark Plugs and Wires
High Speed Emissions Results (25 mph)
--------------------------Standard---------Current------Result
HC (PPM) -------------------160--------------107-------PASS
CO (%)----------------------.90--------------.38--------PASS
CO2 (%)--------------------------------------13.8
O2 (%)----------------------------------------1.4
NOx (PPM)------------------1179--------------1530-------FAIL
Dilution (%)------------------->6---------------14.2
Low Speed Emissions Results (15 mph)
--------------------------Standard----------Current------Result
HC (PPM)--------------------166--------------166--------PASS
CO (%)----------------------.93---------------.65--------PASS
CO2 (%)---------------------------------------13.4
O2 (%)-----------------------------------------1.6
NOx (PPM)-------------------1304-------------2382-------FAIL
Third Test - Replaced O2 Sensor
High Speed Emissions Results (25 mph)
--------------------------Standard-----------Current------Result
HC (PPM)-------------------160-----------------106-------PASS
CO (%)---------------------.90-----------------.23--------PASS
CO2 (%)----------------------------------------14.0
O2 (%)------------------------------------------1.3
NOx (PPM)------------------1179---------------1137-------PASS
Dilution (%)------------------>6-----------------14.2
Low Speed Emissions Results (15 mph)
--------------------------Standard------------Current------Result
HC (PPM)-------------------166-----------------136--------PASS
CO (%)---------------------.93-----------------.29---------PASS
CO2 (%)----------------------------------------14.0
O2 (%)------------------------------------------1.3
NOx (PPM)------------------1304---------------1726--------FAIL
___________
The first test was yesterday afternoon... the second was this afternoon at about 3pm. The third was at 5pm.
This morning I drove from Frisco to Texas Stadium to perhaps clear the cat of any contaminants. The cat and the car definetly were up to operating temp for the second and third test.
Perhaps pre-detonation? The inspection tech was very helpful but there was only so much he could do. Their mechanic walked over and offered his help at $79/hour. I politely said no thanks.
Do you fellas have any ideas? I'm at a loss here...