Race Prep Tech Day Sunday 2/18 @ 10 AM

Printable View

Show 40 post(s) from this thread on one page

02-13-2007, 05:09 PM
cone-cerned

Quote:

Originally Posted by jrj512

Good, the only thing I ever fabricated in my life was a fart.

Quote:

Originally Posted by HudsonHawk

Got a 220 outlet for a Welder?

Can you safely mix farting and welding?::BaHump::
02-14-2007, 12:11 PM
Darron65

I may drop in, depends how successful my oil change/brake bleed/intake cleaning goes on Saturday.
02-14-2007, 12:42 PM
altiain

Quote:

Originally Posted by cone-cerned

Can you safely mix farting and welding?::BaHump::

Yes, but farting in an enclosed garage might not make you any friends.
02-17-2007, 07:50 AM
onething

Back on track . . .

Quote:

Originally Posted by National Solo Rules 2007 EDITION Sports Car Club of America

3.3.4 Vehicle Operating Condition
Any car that is judged by the Event Chairman to be in an unsafe
operating condition at any time during the event shall be barred from
further competition until the deficiency is corrected to the
satisfaction of the Chief Technical Inspector.
02-18-2007, 07:43 AM
MadMonkey

I'll be there in a couple of hours! I have my battery hold-down, my test pipe, and some metal stock to fab an intake brace. Hope somebody knows what they're doing, I heard a little too much "NMC" last time :D
02-18-2007, 01:58 PM
MadMonkey

Well that went well! Sorry I didn't stick around for the after party, guys. I headed for the hobby shop and then as I pulled into the parking lot I remembered that they're closed on Sunday :(

And for once my battery didn't ricochet around in the trunk on the way home!

Thanks for the help and it looks like my car is ready to roll now :D
02-18-2007, 03:34 PM
HudsonHawk

Sorry I missed it. I actually drove by about 2:30 and everyone was gone. Oh well. How did the intake bracket turn out?
02-18-2007, 04:18 PM
sammm

Quote:

Originally Posted by HudsonHawk

How did the intake bracket turn out?

I fabricated a sweet JDM/SGM/TCB bracket. :cat: I think jrj512 took a pic of it.
02-18-2007, 04:19 PM
Treibenschnell

Quote:

Originally Posted by sammm

I fabricated a sweet JDM/SGM/TCB bracket.

You forgot to add NMC.
02-18-2007, 04:26 PM
jrj512

2 Attachment(s)

Here are some pics of the intake bracket. That's some real nice old world craftsmanship by Sammm, although I have to take credit for trimming it to size and drilling the holes.
02-18-2007, 04:33 PM
MadMonkey

JDM TYTE YO!

I was under the car getting grit in my eyes and cramps in my arms while they "slaved" away up top ::Censor::

:clap: for them! :D
02-18-2007, 04:37 PM
channelmaniac

Sweet :D The metal bar stock worked.

I'm glad the excess stuff got put to good use.
02-18-2007, 04:50 PM
MadMonkey

Quote:

Originally Posted by channelmaniac

Sweet :D The metal bar stock worked.

I'm glad the excess stuff got put to good use.

Yup, you were a major part of this operation :drive:
02-18-2007, 05:48 PM
HudsonHawk

Looks sweet. Glad you go it taken care of.
02-20-2007, 12:33 PM
Ted the Red

Looks good and strong. How is it holding up?
02-20-2007, 03:08 PM
MadMonkey

Quote:

Originally Posted by Ted the Red

Looks good and strong. How is it holding up?

Great so far. Sounds better too :D

Hey, now I have enough room to put one of these on it!!
02-20-2007, 04:09 PM
sammm

Quote:

Originally Posted by MadMonkey

Hey, now I have enough room to put one of these on it!!

More wires...just what your car needs! :rolleyes:
02-20-2007, 04:30 PM
HudsonHawk

You really need a big set of pink bunny ears. That should get you at least a second or 2 on your track time.
02-20-2007, 06:08 PM
MadMonkey

Quote:

Originally Posted by sammm

More wires...just what your car needs! :rolleyes:

How can you be so nice in person and such a ::Censor:: on the board? :(

;)

The wires come out when the carpet does :drive:
02-20-2007, 06:20 PM
Majik

Quote:

Originally Posted by MadMonkey

How can you be so nice in person

:confused:

Show 40 post(s) from this thread on one page

All times are GMT -6. The time now is 03:44 PM.