NA parts

Printable View

09-21-2007, 12:42 PM
MadMerv

NA parts

OK, here we go again! I have three parts cars that I will sell as a whole or parts. Actually, none of them are "whole", but each has the major stuff. Interiors are in pieces. IIRC, two are '90's that were hit in the front and the other is a 92 Sunburst that was just barely hit in the back. I will try and get some pictures soon....... Make me offers.

There's one more that is better than above, a '93 LE. It doesn't have the BBS's and body and interior are rough. Has 98K miles, IIRC. I bought it in CA and drove it home with no problems except for some occassional over-heating. Offer?

I also have Morris & Lois Hoover's silver '90, JJ. It had an altercation with a bridge and the right rear and right front damage. It hasn't run in a while, and we tried to get it started but the injectors were not spraying. It may be old gas, or just too much shellac built up. It was running fine when he parked it. It has a header and a CAI, a set of '99 15" wheels with some well used "R" tires. This was one very well maintained car prior the accident. I believe he wanted $1500 for it.

There are lots of other misc parts, too.
09-21-2007, 01:10 PM
CosmosMpower

I may be interested in a transmission if you decide to part them out. Also looking for some plastic pieces from inside the front bumper etc from the car that was wrecked in the back if everything is intac as well as some small red pieces off the LE if still available, PM sent.
09-21-2007, 03:41 PM
Ted the Red

I need a front bumper, driver fender, hood, and both headlight covers if you have them. Just pm me with what you want for them.

Thank you
09-21-2007, 05:07 PM
channelmaniac

If you have one wrecked in the front I need some miscellaneous bolts/screws from the front bumper... and I'm wanting a VLSD rear end for a 1.6L - I have *cash* and time over the weekend to pick it up.

RJ
09-21-2007, 05:18 PM
Jeff_nc

I need a clockspring.
09-21-2007, 10:07 PM
popopo

What color are they?
09-21-2007, 10:50 PM
modernbeat

I need a rear finish panel and a front left fender. Any color.
09-24-2007, 09:00 AM
MadMerv

Quote:

Originally Posted by popopo

What color are they?

silver & Mariner blue
09-24-2007, 09:01 AM
MadMerv

Quote:

Originally Posted by modernbeat

I need a rear finish panel and a front left fender. Any color.

I thin I have a finish panel. No front fenders......
09-24-2007, 09:02 AM
MadMerv

Quote:

Originally Posted by Jeff_nc

I need a clockspring.

got several
09-24-2007, 09:05 AM
MadMerv

Quote:

Originally Posted by channelmaniac

If you have one wrecked in the front I need some miscellaneous bolts/screws from the front bumper... and I'm wanting a VLSD rear end for a 1.6L - I have *cash* and time over the weekend to pick it up.

RJ

I've got all kinds of bolts, so I probably have what you need. Don't know if either car has a VLSD or not.
09-24-2007, 09:08 AM
MadMerv

Quote:

Originally Posted by Ted the Red

I need a front bumper, driver fender, hood, and both headlight covers if you have them. Just pm me with what you want for them.

Thank you

Both cars were hit in the front......
09-24-2007, 09:39 AM
MadMerv

Let me explain...... I have NO time to tear these cars apart for bits and pieces. It also doesn't help to sell stuff for a couple of bucks here and there. I will pull big stuff; engines, trans, rear, suspension, doors, interiors. Would really just like to sell the cars the way they sit. Also, I spend my entire weekends in Granbury working on the house, so i can't do anything, or even be in Sprngtown, if you want anything over a weekend. I know this makes it difficult, but thats the way it is.
09-24-2007, 09:41 AM
rudedog

Finish panel

Mad Merv, Rude Dog here.
If you have one I need a finish panel for my brothers red 92 that was rear ended by a Dodge truck/cell phone.
We can paint it as needed.
I'm talking the panel between the trunk and the rear bumper.
Thanks.
09-24-2007, 09:48 AM
MadMerv

Quote:

Originally Posted by rudedog

Mad Merv, Rude Dog here.
If you have one I need a finish panel for my brothers red 92 that was rear ended by a Dodge truck/cell phone.
We can paint it as needed.
I'm talking the panel between the trunk and the rear bumper.
Thanks.

You're second in line so I will check for two tonight.
09-24-2007, 10:47 AM
miataspeedracer

Quote:

Originally Posted by MadMerv

OK, here we go again! I have three parts cars that I will sell as a whole or parts. Actually, none of them are "whole", but each has the major stuff. Interiors are in pieces. IIRC, two are '90's that were hit in the front and the other is a 92 Sunburst that was just barely hit in the back. I will try and get some pictures soon....... Make me offers.

There's one more that is better than above, a '93 LE. It doesn't have the BBS's and body and interior are rough. Has 98K miles, IIRC. I bought it in CA and drove it home with no problems except for some occassional over-heating. Offer?

I also have Morris & Lois Hoover's silver '90, JJ. It had an altercation with a bridge and the right rear and right front damage. It hasn't run in a while, and we tried to get it started but the injectors were not spraying. It may be old gas, or just too much shellac built up. It was running fine when he parked it. It has a header and a CAI, a set of '99 15" wheels with some well used "R" tires. This was one very well maintained car prior the accident. I believe he wanted $1500 for it.

There are lots of other misc parts, too.

Is the hood from the 93 LE straight? I's also be interested in the black finish panel if it's in good shape. Price?
09-24-2007, 10:56 AM
Sharpie

Sorry speed, the hood is not straight. That car wasn't called James Bondo for nothing.....

Merv correct me if I'm wrong.
09-24-2007, 10:14 PM
modernbeat

Quote:

Originally Posted by MadMerv

I thin I have a finish panel. No front fenders......

MadMerv, how about a PM or email with a price. I'll be glad to pull it myself when I'm in the area in mid-October.
09-26-2007, 08:19 AM
MadMerv

Quote:

Originally Posted by MadMerv

You're second in line so I will check for two tonight.

I only have one good one. If Modernbeat doesn't take it, I'll let you know.
09-26-2007, 08:29 AM
MadMerv

Quote:

Originally Posted by channelmaniac

If you have one wrecked in the front I need some miscellaneous bolts/screws from the front bumper... and I'm wanting a VLSD rear end for a 1.6L - I have *cash* and time over the weekend to pick it up.

RJ

How about another option? I have a brand new H-D racing diff from Mazda Comp that was going into my SM, but since we can now use a torsen, I'm going to swap with my '95. IIRC, the new diff was about $800. Make me an offer, 'cause I sure could use the cash.......
Merv
09-26-2007, 09:57 AM
rudedog

Finsihed?

madMerv, let me know on the panel and I'll be there within hours to get it if he no shows.
Thanks.
09-27-2007, 01:27 PM
juxt3r

Merv,
How complete is James' interior? I know it's rough, and I don't need the whole thing, but I'd love to stop by & swipe some parts if you're willing.

Do you still have an unused set of NA Bilsteins hanging around, or are they long gone?

Might have some interest in the Silverstone, too, depending on the extent of damage...

Shoot me a PM if you like. :D
09-27-2007, 01:35 PM
cam76034

Any tops worth salvaging?
09-27-2007, 04:27 PM
SirHustlerEsq

I need 15" nb wheels.
09-28-2007, 09:11 AM
MadMerv

Quote:

Originally Posted by mr brg

I need 15" nb wheels.

Sorry. I have some but they are on Sunny and Dimples. I'm only sellinn NA stuff.
09-28-2007, 09:47 AM
driftdevil

any word on if he wanted to part the header and intake?
09-28-2007, 09:51 AM
MadMerv

Quote:

Originally Posted by driftdevil

any word on if he wanted to part the header and intake?

Haven't had a chace to fond out......
09-28-2007, 07:20 PM
icepenguin66

If you have a set of NA power mirrors (complete with wires & switch or just the mirrors) I'll take them! Also interested if any tops are in good shape.
09-30-2007, 08:00 AM
modernbeat

Quote:

Originally Posted by icepenguin66

If you have a set of NA power mirrors (complete with wires & switch or just the mirrors) I'll take them! Also interested if any tops are in good shape.

If Merv doesn't have some, I may have a set from my DP donor.

And I've accepted Merv's price for the finish panel.