Printable View
Like to watch and offer "unskilled help" in stalling a roll bar. Thinking of doing it myself since I am a proud member of the TCB & TLB :D . However, I am mechanically challenged :oops: . Like to at least see one of this operation before I start cutting into my car :wink: .
It's on my wish list, but I don't have a definite time frame yet.
It's a piece of cake...
My brother & I did my 92 Black & Tan's rollbar...
Three simple rules:
1. RTFM BEFORE YOU START
2. Measure twice
3. Cut once
The hardest part on mine (Frenzy 4 point roll bar - yes, Warren used to make rollbars) was that the sandwich plates were drilled a little off and the holes wouldn't like up right... I took 'em to a co-worker's house (he's a metalsmith) and got 'em fixed right up.
RJ
I've done them and depending on when, I might be able to lend a hand.
I have tin snips for cutting the alluminum rear deck and a dremel for the interior panels.
Air tools will make the install go much faster. Also, order of how you bolt it in is crucial. Don't drill any holes until the bar is bolted in to the existing threaded holes. (lower seat belt reel and upper seat belt mount on a sport)
I just got my M2 sport rollbar delivered yesterday...
Dropped it off to get finished off last night and will either be installing it this weekend or next depending how long that takes...
You're welcome to come by, I'll let you knwo when.. (But I do live up by TMS, that might be a bit of a haul for ya.)
HHHMMM maybe a tech day would be a good ideal! Any interest?
That might be cool...
I'll do my best to get Chris the spec miata guy to show up and you can ask all teh questions you want... Anything you want to know how to do to a Miata he's probably done...
(Including an M2 sport Rollabr install on his own car)
And yeah, we've got all the required goodies... A couple compressors and air tools, dremels, welders, and about anything else you could come up with.... (except a lift... I want a lift...)
I might be in for a tech day to pay back a little Karma for the help I got on my car.
befor eI get myself in too deep, what are you guys calling a tech day anyway?
A day that we can take your car apart to see what makes it tick? :twisted:Quote:
Originally Posted by rx7gslse
yeah... see I'm planning to install a rollbar.. not take my car apart :)
I'm always up for a little wrenching... depending on how long my "honey-do list" is. :wink: I'd really like to witness /help with some rollbar installs.Quote:
Originally Posted by POS Racing
I'd also be willing to help, depending on my schedule.
If you need a 12" 3/8 bit (which you will) let me know and you can borrow mine!
Now *that* I may not have.... I do remeber it being a pain drilling those back couple holes on the last install. We had a long undersized bit, and then this little hole widening thing... Worked pretty well, but wasn't the cleanest way of doing it....Quote:
Originally Posted by Treibenschnell
Anyone have a spot they know of that sells that black door edge guard stuff? I want to get some of that to clean up the trimmed interior parts.
rx7gslse,
I definitely interested in coming to observe/help with your rollbar install. It is an hour drive from my house, but I drive longer just to AX anyway 8). My email is [email protected]. Please drop me a line when you have the date. I'll be there as long as I don't have to work or AX that weekend. Sorry, that is my priority :wink: .
Don't worry, Treibenschnell, droptop and Iain, I will definitely knock at your door when the time comes.
I like the idea of tech day or a roll bar install demo day. I am sure we can have a install party by getting all our cars together to do the install at the same time. Perhaps, get a goup buy on the bar too. :?:
sweet! Rollbar ready to be picked up! That was fast....
Still not sure on the install.. mayeb this weekend, maybe next. Too much cr@p to do, but I'll keep ya posted.
I like the sound of a group-buy on the roll-bars. Let's keep this in mind.Quote:
Perhaps, get a goup buy on the bar too.
we were talking about that on the other board...
they don't do group buys on the rollbars, but they will do group shipping to save ya some $$$..
Hey all... Looks like the rollbar will be going on probably Friday evening/night and carry over to Saturday... Not exactly teh idea time for a "tech day" but I'm impatient and that's looking liek when it'll be teh best time to get 'r done...
rx7gslse
Can I still come over to "observe" and offer an unskilled hand? Do you think it can be wrapped up by midnight? Friday evening is not politically correct for me to do stuff, but I can manage if I can come home in a reasonable time. Email me with the time you want to start and your address if it is OK.
Sure, you're welcome to come by... No problem...Quote:
Originally Posted by gabkwong
I'd bet we can get most of it done by mid-night, but if not I'll just finish up in the morning... I certainly don't plan to be working on the install past midnight, thats'f for sure.
I helped Chris with his before, so I'm expecting it will go quicker now.. Getting all the trim pieces out is annoying, but difficult. Wedging the rollbar itself into the right spot isn't too hard, but takes soem finesse... Trimming all the plastic parts to go back on I don't know that I'll have the patience to complete on a Friay night, but I hope to get all teh main stuff done at least...
I'll drop you an email....
Alright.. 6:15 to 11:15, five hours progress update..
Everything torn out, fitted and 4 seatbelt bolts in by 8, right side in and bolted by little before 9. two hours fuggin with one bolt on the right side! Cam eout too close to the frame rail se we kinda had to "move" the hole a bit..
So basically all the metal peices are trimmed, only stuff left for morning is trimming plastic parts, hooking up seatbelts and puttin the seats back in..
Looks great :)
It really build my confidence watching rx7gslse works! Now I think I handle this job myself. Thanks rx7gslse for let me get into your way!