iPod Wiring into a 99

Printable View

11-18-2005, 09:05 AM
jolberry

iPod Wiring into a 99

I want to add a AUX input so I can just plug the iPod directly into the stock (non-Bose) stereo. I have been searching the web for answers. I looked on the :batman: board and found a few writeups (mostly on the BOSE stereo). Those FM modulators suck because the quaility of the music is not clear.

Has anyone on here done this or have a better idea besides buying a new radio with an input jack? (trying to stay TCB) I am going on vacation for a week starting tomorrow, but I want to start this project when I get back.
11-18-2005, 09:09 AM
sammm

We have one of these. LINKIE You'll lose the digital quality, but it's the easiest solution for a retro-fit.
11-18-2005, 09:25 AM
tailchaser

I have an awesome input jack from these folks, but it only works on '01+ double-din radios.

I'll cut you a sweet deal on an FM modulator, though. Or, I can probably be coerced into helping you build an input jack for your '99 factory radio.

Here's how
11-18-2005, 09:27 AM
jolberry

That is basically a FM modulator. My wife uses that same one in her car. It's not bad, but it's too bulky for the miata. And like you said..you lose the digital sound. I am wanting to hard-wire it into the stereo and have a plugin.
Found some kits on http://www.installer.com but nothing that is specific to my radio.

Edit: I meant to quote sammm
11-18-2005, 09:32 AM
tailchaser

Quote:

Originally Posted by jolberry

That is basically a FM modulator. My wife uses that same one in her car. It's not bad, but it's too bulky for the miata. And like you said..you lose the digital sound. I am wanting to hard-wire it into the stereo and have a plugin.
Found some kits on http://www.installer.com but nothing that is specific to my radio.

Edit: I meant to quote sammm

I know you meant to quote sammm, but I just gave you the link (and offered to help) with what you want... It would be persuasive if you would drop, say, $20 to rent my FM modulator for your trip :-)
11-18-2005, 09:34 AM
jolberry

Quote:

Originally Posted by tailchaser

I can probably be coerced into helping you build an input jack for your '99 factory radio.

I may have to coerce you when I get back from vacation.

Quote:

Originally Posted by tailchaser

Here's how

I saw that write-up

If I only had a Bose
11-18-2005, 09:42 AM
tailchaser

Quote:

Originally Posted by jolberry

I may have to coerce you when I get back from vacation.

I saw that write-up

If I only had a Bose

Bose shouldn't be an issue. I've made this work in another '99, and I'm nearly 100% certain it wasn't Bose. If I remember correctly (not sure that I didn't already install it in someone else's car) I've got an adapter box built and ready to plug in.
11-18-2005, 09:44 AM
jolberry

Quote:

Originally Posted by tailchaser

It would be persuasive if you would drop, say, $20 to rent my FM modulator for your trip :-)

My wife has a modulator to use. and $20::Shocked: I can use $20 for gas. Lots of driving this next week. :drive:
11-18-2005, 09:45 AM
tailchaser

Quote:

Originally Posted by jolberry

My wife has a modulator to use. and $20::Shocked: I can use $20 for gas. Lots of driving this next week. :drive:

nuts
11-18-2005, 09:46 AM
jolberry

Quote:

Originally Posted by tailchaser

I've got an adapter box built and ready to plug in.

Sweet! :D
01-20-2006, 10:08 AM
jolberry

Update

Success!!!:cheers: I now have a TCB iPod input jack for my Stock stereo. Thanks to TC for helping me out with a ready made box which I disected and made my own like the above link. I bought the Monex connector and jack for less than $3 at Altex in Carrollton and wired it up last night. The sound is very clear without any static like you get from those expensive FM modulators. I'll post a pic later.
01-20-2006, 10:13 AM
tailchaser

Congrats!
01-20-2006, 10:22 AM
Miatamoto

Nice! I just installed an Ipod adapter in the wifes car. Not so cheap, but it has an Ipod connector, charges the Ipod while it's in the car, and uses CD changer controls to control the Ipod.
01-22-2006, 01:15 PM
POS Racing

Quote:

Originally Posted by jolberry

Success!!!:cheers: I now have a TCB iPod input jack for my Stock stereo.

I'll post a pic later.

OK it's later, would you like to share with the rest of us Sparky! ::Angel::
01-22-2006, 01:39 PM
jolberry

1 Attachment(s)

Quote:

Originally Posted by POS Racing

OK it's later, would you like to share with the rest of us Sparky! ::Angel::

Here ya go...Pretty much the same as this link, except no ipod holder. Next step is hard-wiring the power wire. For now I am happy I don't have to fumble through CDs.
01-22-2006, 05:52 PM
black roadster

Anyone want to show me how I can do this to the factory stereo on the MPV?
01-22-2006, 05:57 PM
tailchaser

Quote:

Originally Posted by black roadster

Anyone want to show me how I can do this to the factory stereo on the MPV?

Auxmod is the easiest way
http://www.sylfex.com/products/AuxMod/FAQ.shtml
02-23-2006, 09:38 PM
POS Racing

Quote:

Originally Posted by jolberry

I'll post a pic later.

Is it later yet??

Come on and share kids, I'd like to add this capability to my Miatas!

The 4Runner I just got already has the plug and I have been surprised how much I use it!
02-23-2006, 09:56 PM
tailchaser

He posted a pic... what else ya want?

You hook 3 wires (right, left & ground) to pins on the back of the head unit and to a stereo 1/8 jack (mounted as shown in his pic). You hook 2 more wires to pins in the back of the head unit, connect them to a 1k ohm resistor and a momentary switch and mount as shown in the pic or wherever you want. The button puts the head unit in "Cassette" mode. Just like down town.
02-23-2006, 10:10 PM
POS Racing

Quote:

Originally Posted by tailchaser

He posted a pic... what else ya want?

You hook 3 wires (right, left & ground) to pins on the back of the head unit and to a stereo 1/8 jack (mounted as shown in his pic). You hook 2 more wires to pins in the back of the head unit, connect them to a 1k ohm resistor and a momentary switch and mount as shown in the pic or wherever you want. The button puts the head unit in "Cassette" mode. Just like down town.

That's what I want the how-to instructions!

So those 3 wires would hook to the Cassette Output Connector — CNXXX
Pin 1 R INPUT Input Audio input, right channel (.3 vrms).
Pin 2 SIG GND Signal ground for audio inputs.
Pin 3 L INPUT Input Audio input, left channel (.3 vrms).

What about the other 2 wires??

TIA! :D
02-23-2006, 10:42 PM
tailchaser

Pin 9 <--> Pin 6

12 V off Pin 9 triggers Pin 6 to tell the head unit "Hey!!! this dude wants to listen to his iPod!!! You better switch modes!!!" The resistor is to protect things from going poof.
02-24-2006, 07:43 AM
jolberry

Hey POS, just make sure you buy the "locking" pin connectors with the Molex KK. They sell them with the connector at Fry's. I had to go back and put new ones in after they kept slipping out. Sorry I did not do a step by step photoshoot. Just follow the instructions on the linkie. It's actually a lot simplier than I thought and I am electrically challenged.
02-24-2006, 11:52 AM
sammm

Where does one find the bracket shown in this picture? I checked seriousauto.com but didn't see it there.

http://members.cox.net/zoomzoom/iPod1.jpg
02-24-2006, 12:28 PM
jolberry

Quote:

Originally Posted by sammm

Where does one find the bracket shown in this picture? I checked seriousauto.com but didn't see it there.

Not sure, try this place. I have a nano and will soon order this
02-24-2006, 03:39 PM
tailchaser

Quote:

Originally Posted by sammm

Where does one find the bracket shown in this picture? I checked seriousauto.com but didn't see it there.

Most stereo installation shops can order them... If not you can bribe me to get one... They're usually <$10.
02-24-2006, 04:05 PM
sammm

Quote:

Originally Posted by tailchaser

Most stereo installation shops can order them... If not you can bribe me to get one... They're usually <$10.

I'll give you some money if you get me one! ;) How does that anchor behind that bezel? Any modification to the interior plastic needed?
02-24-2006, 09:28 PM
tailchaser

Quote:

Originally Posted by sammm

I'll give you some money if you get me one! ;) How does that anchor behind that bezel? Any modification to the interior plastic needed?

No mods to the interior plastic. One small hole drilled into the metal frame behind it for a self-tapping screw. Nothing anyone will ever see if you remove it.

Zoiks!!! Cash price from my supplier is now $22... Any of you guys have an account with Hutton Communications?

Edit: Apparently that's not so bad as they're now $35+ from online outlets... Guess that's what happens when Company X buys the competition... If anyone wants to check sources for a better price... Panavise 75127-699 for 99+ cars, -695 for '94-97 (Don't know why the early model wouldn't fit 90-93, but that's what Panavise says, and they're frequently right...)
02-24-2006, 11:37 PM
black roadster

Quote:

Originally Posted by tailchaser

(Don't know why the early model wouldn't fit 90-93, but that's what Panavise says, and they're frequently right...)

Yup. They're right. Different dash. No passenger airbag. Center dash panel is completely different from 93-94.

All times are GMT -6. The time now is 03:30 PM.