New addition to the stable

Well, as some of you know, I have been searching for a Metropolitan for my wife. She has loved them since she was a kid, and always dreamed of getting one and fixing it up. We finally found the right car and will be picking it up tomorrow.

It is a 1957, and it will be getting a hotrod treatment. My father-in-law has volunteered to keep the car in his shop and do much of the work. He has built several hotrods through the years, so we don't need to worry about getting in over our heads. I am pushing for a Miata drivetrain, but it doesn't seem to me going over well. I expect it will end up with a V8 when all is done. ::Flag::

Nice... when's the viewing party?

Who knows... We are picking it up in Kent, TX tomorrow, and it will be going straight to Dad's shop in Lavon. It runs, but isn't drivable. We are told that the clutch needs to be adjusted, but I suspect it may be more that that. A previous owner swapped out the column shifter for a 4 on the floor, opening it up to more than just simple clutch adjustment issues.

I suspect the car will go in a similar direction as this one.

That's gonna look alot nicer than I first thought...

Sweet Ride I always like the Metropolitan!

Where in the heck is Kent, TX??

Quote:

---

Originally Posted by POS Racing

Sweet Ride I always like the Metropolitan!

Where in the heck is Kent, TX??

---

About 120 miles east of El Paso.

Quote:

---

Originally Posted by Treibenschnell

About 120 miles east of El Paso.

---

EEEEWWWW... That will be a fun drive! How did you find it? Ebay??

Cool! What's the size of that thing? Looks like it's not much bigger than a Miata. A V8 in that little thing is gonna be crazy! Looks like it's in good shape in the pics. I'd keep the original classic exterior look and just hotrod the motor and inside.::2Cents::

Congrats!

Can't wait to see it when it's all done.

Quote:

---

Originally Posted by Treibenschnell

About 120 miles east of El Paso.

---

Sorry.. that was supposed to be KEMP, TX.... about 70 miles SE of Dallas. ;)

Quote:

---

Originally Posted by POS Racing

How did you find it? Ebay??

---

Bingo!

Quote:

---

Originally Posted by icepenguin66

Cool! What's the size of that thing? Looks like it's not much bigger than a Miata. A V8 in that little thing is gonna be crazy! Looks like it's in good shape in the pics. I'd keep the original classic exterior look and just hotrod the motor and inside.::2Cents::

---

Smaller than a Miata... 85 inch wheelbase and an overall length of less than 150 inches. The NA Miata has an 89.2 inch wheelbase and an overall length of 155.4 inches.

We went to dinner with my father-in-law tonight and talked engines. While a V-8 has been done by several people in the Metro, it is tight and probably overkill for and 1800 pound car. :D My father in law suggested we try to find a Buick V6, as it can be had in aluminum and there is a good selection of go-fast parts available for it.

Quote:

---

Originally Posted by Titus

Sorry.. that was supposed to be KEMP, TX.... about 70 miles SE of Dallas. ;)

---

That sounds much better... it should make for a fun trip!

Nice find...My Uncle has a few hot rods so if there is any way I can help let me know.

Quote:

---

Originally Posted by Titus

Smaller than a Miata... 85 inch wheelbase and an overall length of less than 150 inches. The NA Miata has an 89.2 inch wheelbase and an overall length of 155.4 inches.

We went to dinner with my father-in-law tonight and talked engines. While a V-8 has been done by several people in the Metro, it is tight and probably overkill for and 1800 pound car. :D My father in law suggested we try to find a Buick V6, as it can be had in aluminum and there is a good selection of go-fast parts available for it.

---

Cool cool, If you decide to use a Buick V6 you ought to talk to my friend's uncle. He used to have 4 Grand Nationals, just sold one of them. He's been modifying and racing them for years.

Hope the project goes faster than my dads 71 Camaro...going on year 6 now I think!::Clown::

We got it home! We were really shocked when we saw it, as it was in much better shape then the poor EBay pics showed. Why people don't wash a car or roll it out into the sun for pics is beyond me. 60 minutes of cleaning and a nice set of detailed pictures would be all it would take for us to re-sell it for an easy $1500 profit.

Even better... It drives. The lady posted that it was not movable due to a clutch issue, but I had no problem getting it on and off the trailer under its own power! :clap:

She had said that she "thought" the engine was from an MGB, but a quick picture search on the net proves her wrong. I need to do some more research as to the model, but stamps stating "stanpart" along with Intake and Exhaust on the passenger side of the block tells us it likely came out of a Triumph. It has a single weber carb and all the Triumph pics I found had dual carbs, so more searching is in order to be sure. The transmission seems to be a perfect match for it so I assume it is from a Triumph as well. It is going to need a whole new wiring harness as the current one has Lucas stamped on it. ::Bawl::

Very nice!!

I've often thought about putting my mirrors on the fenders as well...

would an rx7 engine fit in there?
is this car gonna be strictly for the track
or also for street use?

I went to the salvage yard today and found a
car with the shape of an 86 datsun but way thinner
body style, it had lines for the trunk but no way of
opeining the trunk, no keyhole...
and the engine is similar to what you got.
I'll go again and take some pics...

this could also be a nice project car...

Yea I know it's and old post, but how goes the restoration Titus?? :D

Not a whole lot. The first month or so were busy with stripping it of all things shiny (trim, bumpers, mirrors, etc), filling holes of shiny stuff that won't go back on with lead and/or bondo, removing old bondo, and removing 5 layers of paint from about 3/4 of the car. The last few months nothing has happened, as issues in the shop have put the Met on the back burner. I do believe they picked up a headlight frenching kit (at least that is what I was told the check was for), but that is about it.

What ever happened to this?

Sherman today we are going to set the Way Back Machine to 2006.....

http://collider.com/wp-content/uploa...ax-charles.jpg

Wow.

Quote:

---

Originally Posted by POS Racing

Sherman today we are going to set the Way Back Machine to 2006.....

http://collider.com/wp-content/uploa...ax-charles.jpg

---

Do you have a macro that posts that automatically?

How many cars has KenO gone though since this was originally posted?

Saw a Nash and thought of this. It fell off the radar.

Quote:

---

Originally Posted by TexasStig

How many cars has KenO gone though since this was originally posted?

---

Or Jim H?