Printable View
I'll be working on the car this Friday, replacing the front hubs and possibly new tranny and diff fluids.
I live down in Mansfield and welcome anyone who wants to give a hand or just hang out. I've got air tools if you need them for something on your car.
PM me for the address and my phone number. :D
Thanks for looking.
Anybody?
If i was not leaving town friday, I would attend. I need to do a few things to my car before the 18th.
Id be up for it, but I have to work all night and day.
I'll be in meetings in Tampa all morning and a return flight in the afternoon...
I guess I picked the wrong day! :thumbdow:
Thanks anyway guys. The work seems pretty straight forward so it shouldn't be a big deal.
I think you are running in to 2 problems...
- There are a lot of M-F 9-5'ers around here.
- Mansfield? Is that even part of the metroplex? ::Clown:: I think some of us are closer to Oklahoma then Mansfield! ;)
Why is it you can't drive a few miles? The westsider's do it all the time. Don't you have AAA?::Clown::Quote:
Originally Posted by Titus
Saturday would be a better day. We don't all work 9-5. Some of us work nights. Wish I could make it.;) What time will you be there?
I'm on a 9-80. I get every other Friday off and I've seen a lot of people on this forum that are either in school or are not on traditional work schedules.
Friday's the only free day I've got so that's when I'll be doing it. I'll be at the house most of the day, unless everything goes quickly.
I wish there were an unlimited number of hours in the day that allowed me to participate in lots of different activities, but that isn't the case. My time is precious to me, and I have to consider the balance between family, responsibilities, friends, and fun. Spending 2 hours driving time (and not the fun twisty kind) to spend 3 hours working on cars is hard for me to justify. I would rather spend 3 hours working in my own garage and spend the other 2 hours hanging out with the family. I tend to draw the line at around a 30 miles radius for a half day event... Events in places like Arlington, Euless, and Frisco fit the bill, but Mansfield is just a little too far for me. :cat:Quote:
Originally Posted by riverracer
I would have been up the creek way too many times if I didn't have AAA.::Clown::
I know that not everyone is a 9-5'er... thats why I said "a lot" instead of "all". ;)
Wish I could be there, cause I've got a roll bar to install. But unforunatly I've got to work this friday and sat. I'm off next sat though.:(
Sorry, have to work. :(
How far do you think Mansfield is from Arlington? You know they border each other. :confused:Quote:
Originally Posted by Titus
::Whisp:: psssttt..he's from the Left Coast.Quote:
Originally Posted by Miatamoto
I understand your problem....Have you really ever been to Arlington? :DQuote:
Originally Posted by Titus
Honestly, I have only been there once, and I don't really recall how long it took. I was just going by the fact that it takes me 35-40 minutes to get to Onething's house in Arlington, and Google Maps estimates 64 minutes to Mansfield. Google Maps estimates it as a 24 minute drive from Arlington to Mansfield. I didn't realize that the cities border each other, so I guess a simple city name doesn't give me enough info. I know people are often confused to hear I live in Dallas, even though I am a lot closer to Frisco than downtown Dallas. :rolleyes:Quote:
Originally Posted by Miatamoto
It wouldn't really matter if you lived a mile from me, as I am a 9-5'er, and the Miata isn't even running at the moment. :(
I wish I could be there, but it just isn't in the cards for me! ;)
3 times, which is more than I can say about any city west of the mid-cites and not in California! ::Clown::Quote:
Originally Posted by riverracer
Thread drift on....
What's wrong with your car Titus?
Thread drift off...::Clown::
I have been having cold idle issues for a while, and I have ran through a dozen different tests and part swaps. Saturday, it occurred to me that the AFM was the only thing in the air patch that hadn't been tested or swapped, and it has a Jackson Racing Black Box wired into it add a little extra fuel for the supercharger. I spent a few hours Sunday morning removing the Black Box, removing/cleaning the AFM, and putting it all back together without the black box. Started it up and found that the cold idle was unchanged, but it no longer improves as it warms up. Then I got an AFM CEL when I tried to drive it. I need to re-check the wiring and clean the connector to see if that helps. If not, I will be borrowing the known good AFM from the BUR to test on it before I go buy a new one. ::Censor::Quote:
Originally Posted by riverracer
I would be there if it were on a Sunday.(my only free day) on the weekend
FYI: Google maps estimates you travel 45 at all times reguardless of highways, city streets, or back roads. 45MPH no matter what. So just figure that in.
And I would love to join but I'm leaving for Houston for the weekend on Friday :(
Damn Lockheed employees think that everyone gets every other Friday off. ::Bleh::
I'd love to help, but I've got a job to go to that day.
NOOOOOO... I finally find a map service I like and they go and pull this crap! ::Censor::Quote:
Originally Posted by Bolix
I would go all the way to Mansfield to work on Miatas...except I'm busy Friday. I too need to change my trans. and diff. juices.
I'd like to help as well but I'm swapping out the suspension on my ride...
Yucky... Firday day or Friday night? :DQuote:
Originally Posted by Treibenschnell
It'll be an all day affair... :D
Are you just doing shocks and springs or something. That's a super quick job with the air tools.Quote:
Originally Posted by Treibenschnell
To what? Did you ditch the KYBs and Eibachs?Quote:
Originally Posted by Treibenschnell
He is talking about the VW... I think he mentioned something about a broken control arm.Quote:
Originally Posted by altiain
{Thread Drift On ;) }Quote:
Originally Posted by altiain
Yup... I removing the H&R Coilovers and putting in a Eibach Pro System Kit... I'm tired of the damned thing dragging...
{Thread Drift Off}
{Thread Drift Continues ;) }Quote:
Originally Posted by Treibenschnell
Would this be on you Volkswagen or Miata??
{Thread Drift Off}
{Thread Drift Continues Even More So...;) }Quote:
Originally Posted by POS Racing
Yes... the VW! :D
{Thread Drift Off}
Work done! (with a few breaks in between)
The front hubs were surprisingly easy. Bean, how did everything go with the Vdub?
I'm currently waiting on new rear bumpstops and a set of extra deep offset wrenches on order.