Who would be interested in some PDR work if we can get the 'guy' to come to this side of town? If we have enough to make it worth his time, he may make the trip. I volunteer my garage if no one has a better idea.
Printable View
Who would be interested in some PDR work if we can get the 'guy' to come to this side of town? If we have enough to make it worth his time, he may make the trip. I volunteer my garage if no one has a better idea.
I voted yes, because I have a couple, but it really depends on the day.
Once we see who's interested, and if the 'guy' is interested, we'll schedule a day/time everyone agrees on.Quote:
Originally Posted by Majik
Will you also be providing food, drinks, and entertainment while we wait? ;)
I'd probably show up.
What is a dent?? :confused:
Quote:
Originally Posted by jrj512
A dent is what I'll be making in sammmy's grocery budget if he provides food and drinks! ::Banana::Quote:
Originally Posted by POS Racing
And we all know that ain't happening! (Well, most of us know ::BaHump:: )Quote:
Originally Posted by Treibenschnell
Will this work for the small creases one the doors and the rear quarter panels? How much $ or $$ or $$$ are we taking about? By the way? Where is your new residence is?
I believe it was $25 a panel...Quote:
Originally Posted by gabkwong
Yes, it is $25/panel. Had a great turn-out today, even though it took a little longer than expected (had quite a few bad dents).
I still haven't got mine fixed due to time conflicts. It's got little hail dents on all horizontal surfaces so it may take a while.
If Glen is going to be the PDR guy, then +1 for him. He got some stuff out today that was more than just your typical little dent. Creased dents weren't comming out perfect but they were bearly visible.
Oh count me out, I got fixed up today.
Quote:
Originally Posted by Darron65
Keep in mind $25 a panel does not include hail. Due to the number of dents, prices will vary but will be reasonable if you use Glenn.
My OTM still needs attention ;)
Looks like there might be a couple RSX folks interested. I have sent them the link to this thread.
I would be willing to come out for it if the date chosen works... I have been unable to make the last 2 on my side of town (Not that McKinney is really that close to me anyway). :(
Anyone know what the max material thickness is for a PDR guy?? I got a ding in the 'lac I'd like to get fixed but I have a feeling it's made of thicker stuff than some of these modern vehicles.
They don't call it a "lead sled" for nothin' :DQuote:
Originally Posted by POS Racing
My guess is it depends. It depends on the size of the dent and location. If you have a West Side PDR Partay, just bring it by so he can look at it.Quote:
Originally Posted by POS Racing
Green has a few dings that I need to have fixed and the "new" ride has one. I dont get over here enough so.... sam I sent you a pm with my phone number. If ou could be so kind as to call me if it ever happens.
Paul
You got it.Quote:
Originally Posted by Ataim
Uhhh... 24 miles isn't close?Quote:
Originally Posted by Titus
Hey, I've been out because of the dates so far. If the date worked out I'd drive wherever to get four dents removed.
Where is your side of town? I missed the one in Mckinney :( and that would have been sooo convenient for me.Quote:
Originally Posted by sammm
His avatar is a hint - NRH = North Richland HillsQuote:
Originally Posted by 1966
We be on the West Side
Oh, yeah . . . I was wondering what NRH stood for. I was thinking along the lines of National Rifle H . . . Now I have to mapquest to see where NRH is in relation to Plano. Thanks.Quote:
Originally Posted by onething
I just spoke with Glenn. He's available Saturday (10/7/2006) to come down to North Richland Hills. Does that date work for you? (See new poll)
Master List for 10/7/06:
sammm (2 panels)
cone-cerned (2 panels)
jrj512 (2 panels)
onething (1 panel)
Majik (1 panel)
Ataim (5 panels - 2 cars)
I will bring my Miata on Oct. 7th.
Once again I have a conflict but so be it.
That is the day the club comes over and we start the Vette and then strat the interior install.
Oh well.
I'd be interested. Then I can show off my changes at the ER autocross the following day. The smoother body should create better airflow and better times. ;)
The OTM will be there!
Count me in for green and blue.
Why don't you call Glenn on your own when you have time or host your own PDR Party? You can invite all the vette guys. Oh wait... ;)Quote:
Originally Posted by rudedog
:clap:Quote:
Originally Posted by black roadster
There might be a few RSX people interested. I have started a thread on the RSX board to let them know.
Being that this may take place in sammm's garage and knowing, that he, like me, wouldn't want a bunch of strangers hanging out it my garage, it would be advisable to perhaps wait a sec before inviting other car groups.Quote:
Originally Posted by Nexus Flux
Let's hear what sammmy has to say...
I voted yes to see how many cars we have. I've got tons of dings in Sunny, so I don't want to monopolize his time. Guess I could show up and if there's time, great!
Good call. Thanks Beanie! Plus, I don't want to make this an all-day event.Quote:
Originally Posted by Treibenschnell
First come, first served. I don't want to be doing this until dark-thirty either.Quote:
Originally Posted by MadMerv
Those of you replying, let me know how many panel(s) need work on your car(s).
I did post this a few days ago and I haven't seen anything against it.Quote:
Originally Posted by Nexus Flux
Also I am not inviting anyone to this, I simply put the word out that there is one happening and that way they can check this thread and chime in if interested.
I'm not trying to start anything, I'm just saying.
Also I have updated the other thread to let them know to check with you guys if it's ok to come.
Understood. No damage done.Quote:
Originally Posted by Nexus Flux