Reply With QuoteSoak it with PB Blaster and let it sit overnight.
Exhaust DP to Bell Housing Bracket
Hey all,
I'm taking out the stock exhaust on my 99, and I can't get to the top bolt of the bracket that holds the exhaust downpipe to the tranny bell housing. Any tips or tricks?
'99 Triple Black
Soak it with PB Blaster and let it sit overnight.
Creep is better
I used a 20" 1/2" breaker bar and some very long extensions and a woble joint. I also had the car up on 20" jackstands so I had room to move.
'
I drive to fast to worry about my cholesterol.
Is there a local source for this?Originally Posted by Rogue
Creep is better
Chris
91 Miata (#3), Rattle Can Grey(previous owner), Greddy Turbo @7 PSI and Manifold (Only items remaining from the kit), TDR I/C, Godspeed Radiator, RM DP, 2.5 Enthuza Bipes, BEGI AFPR, ACT, Lightened Stock Flywheel, Yellow Konis, FCM on Stock Springs, HDM2S, MOMO Wheel, Ratsback Front CF Lip, Black Rota's on EcstaXS, Corrado Rotors & XP8's on Front w/ 1.8 rears.
http://austinmiata.com/
Wishlist: Megasquirt to run 12-13 PSI, White non-spray paint job, 8" 6UL's, RX7 LSD, Evans Waterless Coolant
Posting Permissions