2.
OK, so the AGXs showed up today. I openend everything up to inspect it and make sure nothing was missing, and now I've got a question concerning the damping adjustment.
All four of my shocks were shipped set like this:
So... is the shock in the picture set on "2" or "1"?
Iain
"We don't stop playing because we grow old, we grow old because we stop playing." - George Bernard Shaw
See the little black upside down triangle pointing to the #2?
That's yer mark!
Daily Driver: 2013 Club edition in Pearl White Mica
Lightness? What's that? I drive a PRHT!
Thanks guys. That's what I thought, but I wanted to make sure, since the instructions don't actually have anything to say about it.
BTW, should I be able to turn the dial past "4"?
Iain
"We don't stop playing because we grow old, we grow old because we stop playing." - George Bernard Shaw
You can rotate clockwise or counter-clockwise to get to your desired setting. You can rotate from any setting in either direction to get to a 'new' setting.Originally Posted by altiain
It goes to three or one, your call. BTW, I installed my front ones facing opposite directions. That way I can turn the wheel to the left and get to the left from the front, and the right from the back. Just an FYI.Originally Posted by altiain
I installed mine with all 4 dials pointing to the rear of the car. Just some extra protection against something hitting them from the front.Originally Posted by Majik
ha, mine have 8 adjustments.... anotehr reason m1's are better......
even though you can snag some mounts and use m1 setup on the m2...
03 LS FM2ish TDR I/C
99 Disco, the go anywhere ride
I was curious about that one as well a while back so I asked the nice folks at KYB.Originally Posted by altiain
Mick,
It will not hurt the units to go directly from #1 setting to #8. Thanks for
the nice comments on our products.
Tim Oldiges
KYB America LLC
Product Manager
I bet that isnt a respone you get from most product managers or especially finance managers eh sparky??Mick,
Thanks for the nice comments on our products.
Tim Oldiges
KYB America LLC
Product Manager
Yeppie!Originally Posted by Majik
Hey Altiain is there any difference in the spring perch location on your AGX's vs. the Bilstiens???
Dunno yet. On the General's advice, I ordered a replacement set of bumpstops form Mazdacomp yesterday. Once they show up, I'll put the AGXs on.Originally Posted by POS Racing
Iain
"We don't stop playing because we grow old, we grow old because we stop playing." - George Bernard Shaw