NA and NB Parts For Sale

[RavynX]

You can reply to this thread, PM me, or e-mail me at ravynx at gmail dot com. I reside in San Antonio, TX so you'll either have to pay for shipping or you can wait until I go to Mineral Wells, TX in two weeks for the SCCA Match Tour on June 15th-16th (this is assuming they are still having it if they get enough entries by this Monday (June 3rd)).

No dibs. This is first come, first serve.
Do not ask for deals, prices are already low and I expect them to go fairly quick; especially if they make it to MiataTurbo or ClubRoadsters. I'm trying to help local and track friends out first.

Gauge Bezel: $40 obo

AutoMeter Oil Temperature Gauge (ATM-6156no sensor, electrical, 2 1/16" size (52mm)): $80

AutoMeter Water Temperature Gauge (ATM-6155, no sensor, electrical, 2 1/16" size (52mm)): $80

Mazdaspeed Miata Rear Sway Bar with bushings: $100
I was piecing together the suspension setup that 949Racing uses in their "grip-package". They use the MSM rear bar and the Racing Beat Front sway bar.

G-Force 6-point Blue Pull-Up Harness: $120
Expires 2015

G-Force 6-point Blue Pull-Down Harness: $120
Expired in 2012. Still good for HPDE events.

949Racing 6UL 15x9 Gen 1 Wheels with used Nitto NT01 tires: $900
NA/NB: These are the Gen 1 wheels that are gloss black center and spokes with a machined lip. They have 225/45/15 Nitto NT01s on them with about 1 to 2/32 of tread left but have plenty of meat after the tread disappears.



These items have Sold

Spare Koyo 55mm radiator (NB only) that has been repaired by COBB in Austin: $100 (Sold)
NB: I have not tested this unit as I bought a Koyo 37mm while the other one got fixed.

Innovate Motorsports LC-1 Wideband Setup: $80 (Sold)
Used for 20k miles
Blue Gauge
LC-1 unit and all the wiring needed
Wideband Sensor included
I also have the original box too

TopLoc (Hardtop Lock): $80 (Sold)
NA/NB: Comes with both keys, looks brand new

Flyin' Miata Frame Rails: $100 (Sold)
NA/NB: Used, no bolts

Sliding / Adjustable Seat Rails (I think they're from Memory Fab): $100 (Sold)

NRG Slim Hub & NRG Quick Release 2.0 (both are black): $120 (Sold)
NA/NB: Has holes drilled in the Slim Hub to accommodate NB Miatas

Hard Dog Harness Bar: $100 (Sold)
NA/NB: Used, no bolts

Reverant-built MegaSquirt 2 v3 with software: $800 (Sold)
Harness is for 1999-2000 Miatas
Info: http://www.miataturb...-90-05-a-60486/
I paid $815 after shipping just for the MS2v3 unit not including the $70 in MegaLogView and TunerStudio software, $15 in cabling (DB9 and 90 degree connector to avoid firewall), $20 GM IAT sensor. Check out the thread to see all the extra bits that Reverant from MiataTurbo includes on his MS2v3 builds. I had to wait nearly 4 months for mine since he's backed up with so many orders (he's not doing the group buy any more b/c of the amount of orders).

Koni Sports/Race and Ground Control 550/350: $1100 (Sold)
NA/NB: These are Koni Sport shocks revalved by Koni to Race-valving for the Ground Control 550lb front and 350lb rear springs assembled with NB tophats. These are plug-n-play and ready to bolt in.

[RavynX]

949Racing 6UL wheels. 15x9, +40 offset (I think?), Gen 1. Gloss black with machined lip





Flash:






That's just dust/dirt on the tires:

[RavynX]

Added a Hard Dog Harness Bar for sale in 1st post.

[RavynX]

MegaSquirt 2 v3
GM IAT Sensor
Also comes with vacuum line and DB9 cable to run to the glovebox
90 degree DB9 connector included to route DB9 cable by the firewall

[RavynX]

Sliding/adjustable seat rails for driver's side NA or NB Miata.

[RavynX]

TopLoc Hardtop Lock - Fits NA and NB Miatas on the passenger side. Comes with 2 keys.

[RavynX]

Eibach Springs for sale. Used in coilover setups.

7" length, 2.25" ID, 800 lb (two of them) $80/pair
5" length, 2.25" ID, 800 lb (two of them) $80/pair

[RavynX]

Flyin' Miata Frame Rails. They do not come with bolts (I left them on the car)

[RavynX]

Koyo 55mm radiator







Free fan shroud with radiator

[RavynX]

Hard Dog Harness Bar added to the line-up. $100

[RavynX]

Innovate Motorsports LC-1 Wideband Setup: $80
Used for 20k miles
Blue Gauge
LC-1 unit and all the wiring needed
Wideband Sensor included
I also have the original box too.

[RavynX]

Gauge Bezel: $40 obo
AutoMeter Oil Temperature Gauge (ATM-6156no sensor, electrical, 2 1/16" size (52mm)): $80
AutoMeter Water Temperature Gauge (ATM-6155, no sensor, electrical, 2 1/16" size (52mm)): $80

[RavynX]

Bump!

Frame rails sold
Seat rails sold
MegaSquirt sold

[Blue Mica 99]

I'll buy the radiator. I live in frisco though. Do you have a paypal account that i can transfer to?

[Turblowdmiata]

you willing to go any cheaper on the expired harness? if so how much shipped to frisco texas (75034)

[channelmaniac]

you willing to go any cheaper on the expired harness? if so how much shipped to frisco texas (75034)

My brother lives in San Marcos... any items destined for up here can be left with him by the seller.

[RavynX]

I'll buy the radiator. I live in frisco though. Do you have a paypal account that i can transfer to?

I do. It's my username here on this forum at gmail

you willing to go any cheaper on the expired harness? if so how much shipped to frisco texas (75034)

I can do $110 with shipping included? That knocks about $25 off the price. I just realized I still do not have photos of the harnesses. *facepalm me* I will go and find one for you.

My brother lives in San Marcos... any items destined for up here can be left with him by the seller.

That's still an 86 mile round trip for me or $12 in fuel, just an FYI. Thank you for the option though if there are enough people to take 3-4 items up there. :)

[Blue Mica 99]

I do. It's my username here on this forum at gmail


I can do $110 with shipping included? That knocks about $25 off the price. I just realized I still do not have photos of the harnesses. *facepalm me* I will go and find one for you.


That's still an 86 mile round trip for me or $12 in fuel, just an FYI. Thank you for the option though if there are enough people to take 3-4 items up there. :)

cool. Any idea on the cost of shipping the radiator?

[RavynX]

Bump! Wheels are still for sale. Make an offer.

[Mr.E.G.]

Bump. RavynX is a nice guy and the wheels look great. I was interested in them and I happened to be in San Antonio on business, so he was kind enough to meet up with me and let me take a look at the wheels. I ultimately decided to go a different direction but I wanted to take this opportunity to vouch for the seller. These will look badass on somebody's Miata.