It's on my wish list, but I don't have a definite time frame yet.
Like to watch and offer "unskilled help" in stalling a roll bar. Thinking of doing it myself since I am a proud member of the TCB & TLB . However, I am mechanically challenged . Like to at least see one of this operation before I start cutting into my car .
It's on my wish list, but I don't have a definite time frame yet.
It's a piece of cake...
My brother & I did my 92 Black & Tan's rollbar...
Three simple rules:
1. RTFM BEFORE YOU START
2. Measure twice
3. Cut once
The hardest part on mine (Frenzy 4 point roll bar - yes, Warren used to make rollbars) was that the sandwich plates were drilled a little off and the holes wouldn't like up right... I took 'em to a co-worker's house (he's a metalsmith) and got 'em fixed right up.
RJ
Daily Driver: 2013 Club edition in Pearl White Mica
Lightness? What's that? I drive a PRHT!
I've done them and depending on when, I might be able to lend a hand.
I have tin snips for cutting the alluminum rear deck and a dremel for the interior panels.
Air tools will make the install go much faster. Also, order of how you bolt it in is crucial. Don't drill any holes until the bar is bolted in to the existing threaded holes. (lower seat belt reel and upper seat belt mount on a sport)
I just got my M2 sport rollbar delivered yesterday...
Dropped it off to get finished off last night and will either be installing it this weekend or next depending how long that takes...
You're welcome to come by, I'll let you knwo when.. (But I do live up by TMS, that might be a bit of a haul for ya.)
1984 GSL-SE - Its ALIVE!
1989 Suburban 4x4 - 4" Pro-Comp Lift 33" BFGs etc... DRUNK TANK!
2002 Protege5 - Lucky the drunk wagon SOLD
'04 MazdaSpeed Mx-5 Wheeee! Turbos are fun
How can I be so thirsty this morning, When I drank so much last night??
HHHMMM maybe a tech day would be a good ideal! Any interest?
That might be cool...
I'll do my best to get Chris the spec miata guy to show up and you can ask all teh questions you want... Anything you want to know how to do to a Miata he's probably done...
(Including an M2 sport Rollabr install on his own car)
And yeah, we've got all the required goodies... A couple compressors and air tools, dremels, welders, and about anything else you could come up with.... (except a lift... I want a lift...)
1984 GSL-SE - Its ALIVE!
1989 Suburban 4x4 - 4" Pro-Comp Lift 33" BFGs etc... DRUNK TANK!
2002 Protege5 - Lucky the drunk wagon SOLD
'04 MazdaSpeed Mx-5 Wheeee! Turbos are fun
How can I be so thirsty this morning, When I drank so much last night??
I might be in for a tech day to pay back a little Karma for the help I got on my car.
befor eI get myself in too deep, what are you guys calling a tech day anyway?
1984 GSL-SE - Its ALIVE!
1989 Suburban 4x4 - 4" Pro-Comp Lift 33" BFGs etc... DRUNK TANK!
2002 Protege5 - Lucky the drunk wagon SOLD
'04 MazdaSpeed Mx-5 Wheeee! Turbos are fun
How can I be so thirsty this morning, When I drank so much last night??
A day that we can take your car apart to see what makes it tick?Originally Posted by rx7gslse
Iain
"We don't stop playing because we grow old, we grow old because we stop playing." - George Bernard Shaw
yeah... see I'm planning to install a rollbar.. not take my car apart :)
1984 GSL-SE - Its ALIVE!
1989 Suburban 4x4 - 4" Pro-Comp Lift 33" BFGs etc... DRUNK TANK!
2002 Protege5 - Lucky the drunk wagon SOLD
'04 MazdaSpeed Mx-5 Wheeee! Turbos are fun
How can I be so thirsty this morning, When I drank so much last night??
I'm always up for a little wrenching... depending on how long my "honey-do list" is. I'd really like to witness /help with some rollbar installs.Originally Posted by POS Racing
"That which does not kill us, just makes us madder"
Cletus Nietzsche (Friedrich's half-brother on his sister's side)
I'd also be willing to help, depending on my schedule.
Iain
"We don't stop playing because we grow old, we grow old because we stop playing." - George Bernard Shaw
If you need a 12" 3/8 bit (which you will) let me know and you can borrow mine!
Now *that* I may not have.... I do remeber it being a pain drilling those back couple holes on the last install. We had a long undersized bit, and then this little hole widening thing... Worked pretty well, but wasn't the cleanest way of doing it....Originally Posted by Treibenschnell
Anyone have a spot they know of that sells that black door edge guard stuff? I want to get some of that to clean up the trimmed interior parts.
rx7gslse,
I definitely interested in coming to observe/help with your rollbar install. It is an hour drive from my house, but I drive longer just to AX anyway . My email is [email protected]. Please drop me a line when you have the date. I'll be there as long as I don't have to work or AX that weekend. Sorry, that is my priority .
Don't worry, Treibenschnell, droptop and Iain, I will definitely knock at your door when the time comes.
I like the idea of tech day or a roll bar install demo day. I am sure we can have a install party by getting all our cars together to do the install at the same time. Perhaps, get a goup buy on the bar too.
Gabriel
sweet! Rollbar ready to be picked up! That was fast....
Still not sure on the install.. mayeb this weekend, maybe next. Too much cr@p to do, but I'll keep ya posted.
1984 GSL-SE - Its ALIVE!
1989 Suburban 4x4 - 4" Pro-Comp Lift 33" BFGs etc... DRUNK TANK!
2002 Protege5 - Lucky the drunk wagon SOLD
'04 MazdaSpeed Mx-5 Wheeee! Turbos are fun
How can I be so thirsty this morning, When I drank so much last night??
I like the sound of a group-buy on the roll-bars. Let's keep this in mind.Perhaps, get a goup buy on the bar too.
we were talking about that on the other board...
they don't do group buys on the rollbars, but they will do group shipping to save ya some $$$..
1984 GSL-SE - Its ALIVE!
1989 Suburban 4x4 - 4" Pro-Comp Lift 33" BFGs etc... DRUNK TANK!
2002 Protege5 - Lucky the drunk wagon SOLD
'04 MazdaSpeed Mx-5 Wheeee! Turbos are fun
How can I be so thirsty this morning, When I drank so much last night??
Hey all... Looks like the rollbar will be going on probably Friday evening/night and carry over to Saturday... Not exactly teh idea time for a "tech day" but I'm impatient and that's looking liek when it'll be teh best time to get 'r done...
1984 GSL-SE - Its ALIVE!
1989 Suburban 4x4 - 4" Pro-Comp Lift 33" BFGs etc... DRUNK TANK!
2002 Protege5 - Lucky the drunk wagon SOLD
'04 MazdaSpeed Mx-5 Wheeee! Turbos are fun
How can I be so thirsty this morning, When I drank so much last night??