Reply With QuoteYou're going to have to get those OEM parts from a Mazda dealer. Check the Marketplace section on Miata.net for some choices (Trussville, etc).
Bobcats hurt Miatas
Well while I was in Louisiana a week or so ago I hit a Bobcat..he ran right out in front of me on a substandard road.
I looked at the car at night, didnt seem to be anything major wrong with it.
After closely looking at the car I have noticed some pretty major cracks n the paint on the nose and there are some cracked clips and a missing nut.
I am about to go to Ace to get a bolt and nut to fix what I can.
I figure this is a good opportunity to fix whats wrong, so does anyone have info on where I can get the clips that connect the nose to the fender?
Also I need to get a new belly pan and the splash guards (inside the fender) on the left side.
Titus, didn;t you get a flashy new SS belly pan some time ago? if so where, and do they have them for NB's?
Thanks.
99 Miata Black
You're going to have to get those OEM parts from a Mazda dealer. Check the Marketplace section on Miata.net for some choices (Trussville, etc).
Billy, try this Link it may not work.... http://www.mazdamotorsports.com/wcsc...x5_9905_cg.pdf
Kewl thanks.
Titus, I found the old post on where you got your Belly Pan.
99 Miata Black
Yes. Yes he did. The aluminium Beatrush belly pan now resides on my car!Originally Posted by Billy Blaze
I think I remember Titus mentioned that they don't make them for NB's...
yeah I have not been able to find one for an NB yet, most likely will get an OEM one.
Upon further examination I have noticed that it looks as if I am missing more front end parts...does anyone know how many bolts hold on the nose?...lol
I guess I need to take a good look at someone's NB to see just how many little plastic parts I am missing...there are a lot of holes on the nose and there is nothing to connect it to.
I guess I am missing some other plastic piece that ties it all together.
I will be going to pick up a Miata shop manual I guess to figure out what I am missing and get it ordered....it's kind of scary.
$$$$$$
99 Miata Black
I bet a lot of that was missing when your car was fixed. I would find an NB to compare to.
Sorry to hear about that, stupid little critters need to learn to look both ways.
Smile
93' LE #1136 - FM II
250k miles
LOL, yeah funny thing is he survived it.
I am sure the guy just left some parts off the car when it was fixed, and cut as many corners as he could get away with.
I just hope it doesn't nickel and dime me to death, and it can be put back together right.
99 Miata Black
Let the junkyard be your friend.
Smile
93' LE #1136 - FM II
250k miles
Billy if that link works I posted it shows every single piece of the front end! :afro:
I couldn't get it to work, let me try it again tho as I am on dial-up and may not have given it enough time to load (4 hours)...LOL
I appreciate you going through the trouble, I hope it works this time.
Thats exactly what I need.
99 Miata Black
Here is a lising of all the parts for the front bumper assembly of the link!
(The link shows all the crash parts on an NB Miata!)
1 Cover, Front (P) NCY1-50-030D-8J (P) Paint to Match
2 Emblem, Front (Adhesive) NC10-51-731
3 Nut, Speed (3) 9YB3-20-301
4 Frame, License NA01-50-180A
5 Protector, Frame FB01-50-144
6 Cap, Screw (2) 0259-33-693
7 Bracket, Frame (2) NA01-50-18X
8 Panel, Valance NC10-51-9K0A
9 Fastener, Upper R/L 1395-68-676-00
10 Fastener, Outer Lower R/L BF67-50-033
11 Fastener, Inner Lower R/L BF82-50-233
12 Guard, Side Bumper R NC10-50-121B L NC10-50-131B
13 Clip, Bumper Guard(4/Side) R/L GJ21-50-049
14 Slide, Otr Bumper R/L NC10-50-E11B
15 Slide, Inr Bumper R/L NC10-50-E13A
16 Seal, Side Bumper R/L BC1M-50-0Z5
17 Screw, Side R/L 9CS6-00-520
18 Screw, Center (3) R/L 9GDB-00-616
19 Grommet R/L NC10-50-0G8
20 Rivet (2/Side) R/L 9025-84-809
21 Guide, Air NC10-50-A21A
22 Cover, Guide (3) NA01-50-101A
23 Reinf, Bumper NC10-50-071A
24 Retainer, Bumper NC10-50-0K0B
Thanks POS!
I got it to work, I am for sure going to need #8 mine is just mangled and also all the plastic connectors and bolts...also the splash guards on the driver side.
I will need to take it all apart to see what else I need.
Last edited by Billy Blaze; 02-01-2006 at 04:36 PM. Reason: blah
99 Miata Black
You say the cat survived, but did it lose any parts to your car? Ugh...
Actually, the first Beatrush Pan I saw was being installed on an NB. It went on to the NB from Canada that was on Tuner Transformation.Yes. Yes he did. The aluminium Beatrush belly pan now resides on my car!
I think I remember Titus mentioned that they don't make them for NB's...
If you really want one, you need to be willing to wait a while as nobody in the US stocks them. I had Eddie at Adrenaline Racing import mine and it took months. The other thing to consider is that it doesn't work with Gary's intercooler setup. That is why the BUR is sporting mine now.
Contact info:
Eddie Nakato
Adrenaline Racing
Sales and Customer Service
www.adrenalineracing.com
Ph (360)566-0173
Fax (360)566-0218
Been there, done that. You'd think having the original parts plus an entire front clip that they could get one complete set of hardware to put my bumper back on!
Well, at least it doesn't sound like the damage is too bad.
90 MX5 281k miles! - euro spec, Porsche Riviera Blue w/black hardtop, 97 motor swap, vintage Borbet rims, GC, FM shock hats/frame rails/rear sub-brace, AGX, sway bar, stb, Fidanza/ACT combo, EBC Yellows
92 COMMA SM - new paint coming soon...
On the Beatrush pan, if it does not work with Gary's intercooler then I guess I will be going OEM.
As far as the Bobcat goes, he survived the hit but maybe didn't survive the night....on the way back from where I was going I saw a set of eyes in a field on the side of the road I assume that was him but I wasn't going to stop to look...lol
99 Miata Black
Posting Permissions