I have a dream...

[black roadster]

What would you do to your Miata if money were not the issue.

Rulz:

• No trade-ins, must involve your current Miata
• Must be technically feasable and reasonable. No Flux capacitors, etc...
• Be serious! No 22" Spinnaz
• Must be upgrades or modifications to the Miata only! No drivers ed, dream garages, etc...

I'll post mine later. Got to go get ready for work.

[channelmaniac]

Easy!

1. Finish my Spec project...

2. MP45, intercooler, and some SSRs for the Daily Driver!

RJ

[srivendel]

Pretty much this. Except minus the hard top and plus the HDSDD that I've already installed. And with grey paint, like mine.



S.

[Titus]

1. FM Rear Shock Towers
2. FM Butterfly brace
3. Big brake kit
4. Leather seats
5. Momo wheel
6. new carpet
7. paint refresh (bumpers, rear finish panel, and mirrors re-painted, PDR and professional chip repair on the body)
8. 16" BBS RG-Fs
9. FM built bottom end, ported and polished head
10. custom engineered 1.6 MP62 kit
11. custom stereo with headunit that runs windows

I expect I will do most everything listed some day. I have a list that I created when I bought the car 5 years ago that listed everything I wanted to do, prioritized. I broke it out into $1500-2000 a year, and I have stuck to it, only making a few small changes to the list as I go.

[Treibenschnell]

My list would be too long...

[Majik]

Money not an issue? I would probably prep my car to the very edge of the SM2 rules. So supercharged with all the supporting mods. Fully adjustable custom suspension yadda yadda.

[BAM!]

stitch weld all seams
new gussets on unibody
acid dip uni body
m2 subframes, new poly bushings, custom control arms
goodwin brakes
fm butterfly brace, frame rails, and cannon RLCA brace
cf hard top, trunk, finish panel, hood, headlight lids
maybe CF doors and fenders
jubiride fender flares, super low offset wheels like the Work Equip 03's
HDHCDD w. leather cover over the padding
TEIN coilovers w. EDFC
STACK instrument cluster, aftermarket standalone EMS
double DIN am/fm/cd/mp3/dvd/navigation head unit, amp, and components
Moss lo-pros, w. hid conversion, exotic rear lights w. LEDs
CF racing seats, w. 5pt harnesses
alcantara/suede quick release steering wheel
6speed tranny w. Torsen or aftermarket LSD

and then theres the ~$20k motor.

[Kakkyo]

My primary objective is a fun street car that can also have some fun on the track.

-I/H/E
-Build up the entire motor with low compression pistons
-TD06 DIY kit with a Garrett tube and fin intercooler
-AEM EMS or GReddy eManage Ultimate
-Blitz Mirror Drive support gauges (Oil pressure, boost, exhaust temp)
-Defi VSD Concept HUD system
-Eclipse headunit and better speakers
-Rota Subzeros in flat black sized at 15" x 6.5"
-Sticky Kuhmo all season tires
-Goodridge stainless steel braided brake lines
-Goodwin Racing big brake kit
-Koyo Racing Radiator
-310CC Injectors
-Walbro 200lph fuel pump
-Spec Stage II clutch
-Fidanza flywheel
-Tein Flex coilover system
-TDR PPF kit
-TDR Front tower brace
-Moss Motors rear shock tower brace
-Racing Beat front and rear sway bars
-Heim jointed end links
-Hard Dog Hard Bar
-Interior CF trim conversion
-Sparco Siena seats in black
-Sparco 2" 4-point harness in blue
-CF body panel conversion
-Repaint CF body panels to Brilliant Black with a hint of Innocent Blue Mica pearl
-ClearCorners.com LED projector front headlamps and rear LED tails
-Miata LS Nardi 3 point steering wheel
-Miata LS 6-speed
-KAAZ 1.5 way limited slip
-CF hard top repainted to Brilliant Black with Innocent Blue Mica Pearl

[altiain]

I'm not exaclty sure what I'd do, but it would probably involve a Sawzall and a tow vehicle....

[channelmaniac]

... probably involve a Sawzall...

You going to do the Moti mods for aerodynamics?

[Bolix]

One word(ok, maybe a series of letters/numbers): RB26DETT

[altiain]

You going to do the Moti mods for aerodynamics?

Yeah, that's right.

Nah, if funds were unlimited, I had to keep the Miata, and I had a tow vehicle I'd probably hack off the windshield, gut the interior, and build a car for DP or XP.

[blackzx3_13]

1. Buy a Miata, for this example, a leftover 05 mazdaspeed
2. Strip it down to around 2000lbs
3. bump it up to around 250hp at the rear wheels
4. Have fun.

[JDMClassic]

Strip it down and rebuild the car 100%.. just like on Overhauled or whatever that show is. But it'd still look the same, just everything new or totaly restored!

[tailchaser]

Money not an issue? I would probably prep my car to the very edge of the SM2 rules. So supercharged with all the supporting mods. Fully adjustable custom suspension yadda yadda.

If money's not an issue, I'm bribing Kumho to build some 710s in 285/30-15. It's technically feasible, by gum. Other than that... what he said.

[Bolix]

Actualy now that I think about it, I would pay those Australian guys to build me a 4-rotor with the carbon apex seals from the Renesis motor... that or just a good old fasion 20b swap.

[BAM!]

Strip it down and rebuild the car 100%.. just like on Overhauled or whatever that show is. But it'd still look the same, just everything new or totaly restored!

nice job photoshopping your mirrors onto my car! yeah thats a good idea too... what you said!

[Miatamoto]

SM2 legal Renesis or 13B Turbo swap (remeber anything is possible with enough money)

or

a crazy N/A built Miata

[JDMClassic]

nice job photoshopping your mirrors onto my car!

whach you talkin bout willis?