I don't know how much was taken apart and reassembled, but guesses are:
- Oil on clutch either in assembly or from a leaky seal (CAS or crank seal maybe?)
- Clutch pedal needs to be adjusted
- Pressure plate is worn down.
So I've taken the car out for a couple of small test trips around the 'hood, and I'm finding that the car isn't accelerating like it used to. It does this funky, sort of automatic-tranny type of slipping while in gear. So far only 1st and 2nd (I haven't ventured into the higher gears yet...)
Any ideas as to why the car may be doing this? Otherwise, it everything else seems to be ok.
I don't know how much was taken apart and reassembled, but guesses are:
- Oil on clutch either in assembly or from a leaky seal (CAS or crank seal maybe?)
- Clutch pedal needs to be adjusted
- Pressure plate is worn down.
Hmm, when you're accelerating in 2nd does it feel like the the clutch slips slightly for a couple of seconds, then catches and you accelerate normally? If so that's exactly whats been happening with mine since I bought it.
09 Lexus RX350
.... no Miata
Go drive it up a hill and short shift from 2nd to 5th. If RPMs jump and the car doesn't it's slipping. Mine felt like that during autocross launches and a new slave cylinder fixed that problem. Check that out.
The slave is very simple
HOW TO
I forgot to add the clutch pedal is squeaking like nobody's business...
We'll have to try to re-do the clutch master/slave bleed.
I have my vacuum pump located again.
05 MX-5 Mazdaspeed #1024 Titanium Gray Mica
Rebuild Kit < $5 @ O'O'O'Reilly.
2+ years on mine.
I needed one a few weeks ago. It's gone up to $7. Sorry Bean, you might have to save up for this one.
Any preferred retailers or should I just get it via Mazdaspeed?
Well, ventured out a little bit further and I'm starting to think that those who voted clutch are right. It's not having a problem getting into gear, its having a problem accelerating after being put in gear. It goes but wants to rev before it feels like it catches.
Any preference?
LiNkIe ONe - Flyin' Miata
lInKiE twO - Goodwin
Any other good vendors with TCB deals?
Have you priced the parts on Mazdaspeed I thought you were a memeber?
Another choice is Trussville who is offering free shipping :
Available Years: 1993, 1992, 1991, 1990
Available Models: Miata
DESCRIPTION:
Mazda Miata Factory Clutch Kit 1.6. Includes clutch disc, pressure plate, t/o bearing, pilot bearing.
Large Image PART NAME PART NO. OUR PRICE
Mazda Miata 1.6 Clutch Kit 1.6-Clutch Kit $207.44
Get a new rear main seal too. That was actually what my problem was when I thought it was clutch.